High quality insulation material \

Share on:


Price:$40.50 - $45.00
Price in USD:Details

Quantity:


Product Overview

Description


header.png


High quality insulation material "Risolin Fsa 2.5mm" for roofs and walls, from manufacturer, building insulation


SELF-ADHESIVE, ALUMINIUM FOIL SURFACED



FIELD OF APPLICATION


The material is recommended for the installation and reparation of objects with metal, seam roofing, slate roofing, roofs made of profiled sheeting, OSB, wooden roofs, concrete slabs, sand-cement screed, brick works, PVC membranes, felt roofing, etc.;

roof and wall waterproofing combined with different heat-insulating materials;

waterproofing and acoustic insulation of air lines;

waterproofing and heat insulation of span pipe lines laggings, protection of steel tanks;

anti-radon protection of buildings.



























DESCRIPTION


Rizolin FSa is made of tearproof reinforcing fiberglass cloth impregnated with bitumen-polymeric compound with a protective aluminium foil layer.

The material is absolutely waterproof, resistant to rapid temperature changes, bioresistant. Due to protective aluminium foil layer the material is resistant to ultraviolet impact and corrosive environment that allows to maintain its waterproofing properties permanently.

Can be used in all climatic zones (according to SNiP 23-01-99).


METHOD OF INSTALLATION


img.jpg


The material is easy in application and does not require any special equipment. To apply Rizolin FSa one must only take off the release film, place the material onto a dry, dust-free surface and roll it down with a roller. (SNiP 3.04.01-87).

ATTENTION: Self-adhesive material properties retain at an air temperature above +15 degrees C. At lower temperatures a little heat must be applied to the adhesive side till the appearance of high luster in order to ensue the adhesiveness (SNiP II -26-76*).

DO NOT heat the material from foil side!



Basic physical and mechanical characteristics
of the material RIZOLIN FSa










































































Thickness, mm2,5 + / - 0,15
Breaking force under tension in longitudinal/
transverse directions, not less
900/1000
Adhesive strength, not less, kN/m 
- from steel surface1,5
- from concrete surface1
- from wooden surface0,5
Thermal resistance within 2 hours in the
upright position, degrees C not less
+70
Radius of curvature temperature (25+ / - 2) mm,
degrees C, not above
-25
Water absorption, less than %1
Operating temperature, degrees Cfrom -50 to +60
Vapor resistance, less than mg/(m*h*Pa)0
Waterproofing under a pressure not less than
0,2 MPa within 2 hours
Absolute
Upper layerAluminium foil (30 um)
Reinforcing baseFiberglass cloth
Lower layerRelease film
Roll weight, kg25
Length/width, m10x1



PACKAGING AND DELIVERY


















Processing Time:



10 Days



Port:



St. Petersburg



Packaging Details:



europallet




F.A.Q.


faq.png


MAIN
ADVANTAGES














adv1.png

FIRELESS
APPLICATION
METHOD


It is an irreplaceable material on the projects where direct flame application is impossible by safety regulations.



adv2.png

WORKING
LIFE IS OVER
25 YEARS


Using Rizolin is 24-33% more economy than using other common materials.



adv3.png

OPERATING
TEMPERATURE FROM
-50 DEGREES C TO +60 DEGREES C


Reducing of number of layers and 30% reduction of material consumption.



adv4.png

SELF-ADHESIVE,
APPLYING ON ANY
SURFACE


Low-cost installation: minimum of working hours.




ABOUT COMPANY


about.jpg

The "RIZOLIN" Company has been producing self-adhesive waterproofing and roofing roll bitumen-polymer materials under the namesake brand RIZOLIN since 2009.

The RIZOLIN materials absorbed all the advantages of the previously and currently produced waterproofing materials: high strength, longevity, low cost, perfect adhesion to the base, easy installation, aesthetic appearance, plasticity, low labor inputs of waterproofing works on complicated areas which can be expressed in one word - processability.


about1.jpg

Our materials can be used in any waterproofing works: starting from the underground parkings, metro stations, bridges, roads and airdrome take-off sites and finishing with roofing of new buildings and renovation of historical structures of any complexity.

The unique fireproofing characteristics among the bituminous materials: B1, RP1, G2, KP0, European certificate Broof T3.



RECOMMENDED PRODUCTS













rec1.png rec2.png
rec3.png rec4.png


header.png

2.5127 s.