SELF-ADHESIVE FROM TWO SIDES
FIELD OF APPLICATION
Waterproofing of roofs, foundations, swimming pools, pipelines, industrial tanks. This material is irreplaceable in petrochemical and power plants where the usage of open flames is restricted according to safety regulations.
Rizolin AS-2,5 - is used for installing and repairing roofs with a two-layered carpet as a lower layer; roof and wall waterproofing in combination with different insulation materials; waterproofing of foundations, swimming pools, soakage systems, basements, tanks; floor waterproofing; underground piping, isolation valves and heating lines etc.
Rizolin AS-1,7 - is used for installing and repairing roofs with a two-layer carpet as a lower layer; as a vapor barrier.
The material is made of durable reinforcing fiberglass cloth on both sides impregnated with bitumen-polymeric compound with targeted additives that improve its operating abilities. The material is absolutely waterproof, resistant to rapid temperature changes and mechanical influences; bioresistant.
Can be applied in all climatic zones (according to SNiP 23-01-99).
METHOD OF INSTALLATION
(according to «Guideline for installation of roofs with self-adhesive rolled waterproofing material «RIZOLIN»)
The material is easy in application and does not require any special equipment. To apply Rizolin AS one must only take off the release film, place the material onto a dry, dust-free surface and roll it down with a roller. (SNiP 3.04.01-87)
ATTENTION: Self-adhesive material properties are retained at an air temperature above +15 degrees C. At lower temperatures a little heat must be applied to the adhesive side till the appearance of high luster in order to ensue the adhesiveness (SNiP II -26-76*).
Basic physical and mechanical characteristics
of the material RIZOLIN As
|Thickness, mm||1,7 + / - 0,15|
|Breaking force under tension in longitudinal/ |
transverse directions, not less
|Adhesive strength, not less, kN/m|
|- from steel surface||1,5|
|- from concrete surface||1|
|- from wooden surface||0,5|
|Thermal resistance within 2 hours in the |
upright position, degrees C not less
|Radius of curvature temperature (25+ / - 2) mm, |
degrees C, not above
|Water absorption, less than %||1|
|Operating temperature, degrees C||from -50 to +60|
|Vapor resistance, less than mg/(m*h*Pa)||20|
|Waterproofing under a pressure not less than |
0,2 MPa within 2 hours
|Waterproofing under a pressure not less than|
0,5 MPa within 10 min. hours
|Upper layer||Release film|
|Reinforcing base||Fiberglass cloth|
|Lower layer||Release film|
|Roll weight, kg||17|
PACKAGING AND DELIVERY
It is an irreplaceable material on the projects where direct flame application is impossible by safety regulations.
Using Rizolin is 24-33% more economy than using other common materials.
Reducing of number of layers and 30% reduction of material consumption.
Low-cost installation: minimum of working hours.
The "RIZOLIN" Company has been producing self-adhesive waterproofing and roofing roll bitumen-polymer materials under the namesake brand RIZOLIN since 2009.
The RIZOLIN materials absorbed all the advantages of the previously and currently produced waterproofing materials: high strength, longevity, low cost, perfect adhesion to the base, easy installation, aesthetic appearance, plasticity, low labor inputs of waterproofing works on complicated areas which can be expressed in one word - processability.
Our materials can be used in any waterproofing works: starting from the underground parkings, metro stations, bridges, roads and airdrome take-off sites and finishing with roofing of new buildings and renovation of historical structures of any complexity.
The unique fireproofing characteristics among the bituminous materials: B1, RP1, G2, KP0, European certificate Broof T3.