SELF-ADHESIVE, ALUMINIUM FOIL SURFACED
FIELD OF APPLICATION
-The material is used for repair and sealing joints seams and junctures of different roof and waterproofing cloths, pipelines, air tubes, gutter systems;
-Waterproofing, heat proofing and repairing of pipelines, air tubes, door units and window frames;
-Vibration and sound insulation of vehicles.
High adhesive rate to all kinds of bases (metal, concrete, wooden, polymer)
-Multipurpose self-adhesive sealing tape Rizolin FS, AS is made of reinforced, tear-resistant fiberglass cloth impregnated with bitumen and polymeric composition.
-FS type sealing tape is made with an aluminium foil protective layer,
-AS type sealing tape is self-adhesive from both sides.
-The material is waterproof, resistant to mechanical influences, rapid changes of temperature, ultraviolet influence and corrosion.
Can be applied in all climatic zones (according to SNiP 23-01-99).
METHOD OF INSTALLATION
(according to «Guideline for installation of roofs of self-adhesive rolled waterproofing material «RIZOLIN»)
The material is easy in application and does not require any special equipment. To apply Rizolin sealing tape one must only take off the release film, place the material onto a dry, dust-free surface and roll it down with a roller (SNiP 3.04.01-87)
ATTENTION: Self-adhesive properties of the material retain at an air temperature above +15 degrees C. At lower temperatures a little heat must be applied to the adhesive side till the appearance of oily luster in order to ensue the adhesiveness (according to SNiP II -26-76*).
DO NOT heat the material from foil side!
Basic physical and mechanical characteristics
of Sealing tape Fs-200
|Thickness, mm||2,5 + / - 0,15|
|Breaking force under tension in longitudinal/ |
transverse directions, not less
|Adhesive strength, not less, kN/m|
|- from steel surface||1,5|
|- from concrete surface||1|
|- from wooden surface||0,5|
|Thermal resistance within 2 hours in the |
upright position, degrees C not less
|Radius of curvature temperature (25+ / - 2) mm, |
degrees C, not above
|Water absorption, less than %||1|
|Operating temperature, degrees C||from -50 to +60|
|Vapor resistance, mg/(m*h*Pa)||0|
|Waterproofing under a pressure not less than |
0,2 MPa within 2 hours
|Waterproofing under a pressure not less than|
0,5 MPa within 10 min. hours
|Upper layer||Aluminium foil (30 um)|
|Lower layer||Release film|
|Width /length roll, m.||0,2/10|
|Roll weight, kg||5,0|
PACKAGING AND DELIVERY
It is an irreplaceable material on the projects where direct flame application is impossible by safety regulations.
Using Rizolin is 24-33% more economy than using other common materials.
Reducing of number of layers and 30% reduction of material consumption.
Low-cost installation: minimum of working hours.
The "RIZOLIN" Company has been producing self-adhesive waterproofing and roofing roll bitumen-polymer materials under the namesake brand RIZOLIN since 2009.
The RIZOLIN materials absorbed all the advantages of the previously and currently produced waterproofing materials: high strength, longevity, low cost, perfect adhesion to the base, easy installation, aesthetic appearance, plasticity, low labor inputs of waterproofing works on complicated areas which can be expressed in one word - processability.
Our materials can be used in any waterproofing works: starting from the underground parkings, metro stations, bridges, roads and airdrome take-off sites and finishing with roofing of new buildings and renovation of historical structures of any complexity.
The unique fireproofing characteristics among the bituminous materials: B1, RP1, G2, KP0, European certificate Broof T3.