Share on:
Dual Ethernet ARM board Based on IMX6ULL Cortex A7 Development Board with Wi-fi bluetooth and 4G
IDO-EVB6Y09 is a development board for i.MX6ULL . It is developed based on the IDOSOM6Y08 core board. It is equipped with IMX6ULLIEC processor and the maximum frequency can reach 800MHz. Support WIFI Bluetooth module and 4G full Netcom module wireless communication mode, provide dual Ethernet interface, CAN, RS-485, RS-232, USB OTG, TF card, SIM card, LVDS, RGB, TP and audio and other functional interfaces . It can be used as an evaluation board or widely used in various industrial Internet of Things gateways and industrial control equipment.
Standard equipped with IDO-SOM6Y08 series Cortex ™ -A7 SOM: IDO-SOM6Y08-
D256N256 or IDO-SOM6Y08-D512E8G
Main frequency 800M Hz, 256MByte DDR3, 256MByte NandFlash
Equipped with 128 KB L2 cache
The integrated power management module reduces the complexity of the external power supply and simplifies the power-on sequence
Parallel LCD display with resolution up to WXGA (1366x768)
2 audio interfaces (including recording and playback), left channel, right channel
1 LVDS
2 RGB,24bit RGB
2 10/100 adaptive ethernet 5 UART,UART1 for debug
2 RS232
2 RS485
3 USB2.0
1 Can-bus signal interface
2 wireless module interfaces, 1 4G module interface (MINI-PCIE), 1 WIFI/BT interface
1 TF card
1 SDIO
2 I2C
1 SPI
Multiple IO expansion interfaces
Car telematics
IOT gateway
Human-machine interface
Home energy management system
Intelligent energy information concentrator
Intelligent industrial control system
Electronic POS equipment
Portable medical equipment
Printers and 2D scanners, etc.
Specifications |
Definition |
CPU |
i.MX6ULL ARM 800MHZ,40~105℃ Industrial grade |
DDR3 |
256MB/512MB optional,256 default |
FLASH/eMMC |
Support NAND FLASH from 256MB to 1GB Or eMMC 4GB~32GB 256MB NAND FLASH default |
LAN |
2 10M/100Mbps adaptive |
USB |
3 USB 2.0 Host |
4G |
LTE B1/B3/B38/B39/B 40/B41; 3G B1/B34/39/BC0 GSM/EDGE; B3/8 Support main/diversity antenna, GPS antenna; Standard drawable SIM card holder, eSIM optional |
SIM card holder |
1, Support standard SIM card Reserve eSIM card position, support eSIM |
RS485 |
2 channels with interface protection, isolated RS485 transceiver |
RS232 |
2 channels with interface protection, isolated RS232 transceiver |
CAN |
1 channel with interface protection, isolated CAN transceiver |
TF card |
Micro SD card standard |
Audio output |
1 channel 4 section OMTP standard 3.5mm headphone jack, support voice input; 1 dual channel 8ohm 1W speaker (PH2.0 4Pin); |
LCD |
Support a variety of commonly used LCD screens, up to 1366 * 768 resolution; One 50Pin 0.5mm FPC seat, support universal 7 and 10.1 inch LCD One 24bit LVDS interface, support larger size LVDS interface LCD. |
LVDS screen backlight interface |
1, support 5V or 12 LVDS backlight power supply, PWM dimming output; |
Resistance touch screen interface |
4-wire resistive touch, expanded through PH-4P connector and 4Pin 1.0mm FPC seat; |
Capacitive touch screen interface |
I2C communication, external expansion through 6Pin 0.5mm FPC seat; |
Keys |
1 RESET button, 1 ON/OFF button (long press to turn off, short press to turn on), 1 firmware upgrade button (MODE0) |
WIFI/BT |
Support RT8723BU/ATBM6032I WIFI/BT module; |
Extension port |
3 channel, expand 46 CPU IO, can be configured as GPIO/I2C/SPI/SDIO/UART/CAN; |
RTC |
Independent RTC clock chip, 1220 button battery, easy maintenance; |
LED indicator |
1 4G indicator, 1 system indicator, 1 power indicator, 1 custom indicator; |
Power input |
9 ~ 30V DC @ 1A power supply; Standard DC block 5.5 * 2.1 interface. |
Capacitive touch screen interface |
I2C communication, external expansion through 6Pin 0.5mm FPC seat; |
Keys |
1 RESET button, 1 ON/OFF button (long press to turn off, short press to turn on), 1 firmware upgrade button (MODE0) |
WIFI/BT |
Support RT8723BU/ATBM6032I WIFI/BT module; |
Extension port |
3 channel, expand 46 CPU IO, can be configured as GPIO/I2C/SPI/SDIO/UART/CAN; |
RTC |
Independent RTC clock chip, 1220 button battery, easy maintenance; |
LED indicator |
1 4G indicator, 1 system indicator, 1 power indicator, 1 custom indicator; |
Power input |
9 ~ 30V DC @ 1A power supply; Standard DC block 5.5 * 2.1 interface. |