Share on:
Hollow Conjugated Silicon/Nonsilicon PSF
Item |
Type |
Grade |
2.5Dx32mm/51mm/64mm/76mm |
HCS/HC PSF |
Recycle/virgin |
3D/4Dx32mm/51mm/64mm/76mm |
HCS/HC PSF |
Recycle/virgin |
6D/7D/8Dx32mm/51mm/64mm/76mm |
HCS/HC PSF |
Recycle/virgin |
12Dx51mm/64mm/76mm |
HCS/HC PSF |
Recycle/virgin |
15D/18Dx32mm/51mm/64mm/76mm |
HCS/HC PSF |
Recycle/virgin |
Usage: Nonwoven fabric, filling, mattress, outerwear, Jacket, coat, comforter, Spunbonded fabric, soft loft, hard padding, resin bonded fabric and so on.
Functional HC/HCS PSF is also available (Flame-resistant, Antibacterial)
Functional Polyester staple fiber is produced according to customer’s requirements, and it has passed BS5852, ASTM E2149-10 also can be inspected before shipment is available.
1 Stable quality
Raw material is the most important for the quality control. Our raw material is PET flakes which are made of clean drinking bottles. We have dozens of staple suppliers with good quality PET flakes, and we keep developing new suppliers. In that case, we could keep our stock at a level of 2000MT, while the capacity is 100 MT per day. Therefore, we could keep the quality almost same from lot to lot.
2 Nice resilience
The resilience of PSF is decided by raw materials’ viscose. The higher of the IV, the resilience is better. We have our own quality inspection department to inspect the IV of each lot, and the IV value of all the material we are going to use must be over 0.72
3 Effective control on Fusion points
The fusion points of the fiber caused by the PVC content in the raw material. The more PVC, the more fusion points. We will not use the material which has more than 200ppm PVC. We use oven test to inspect the PVC content and also ask our suppliers use the same way to test it and then control the PVC content effectively.
4 Bright color
We only use the raw material with less than 1000ppm yellow flakes after oven test, the color of the whole material will not turn yellow, and then the final produced fiber will show good and bright color.
Solid, Hollow Silicon/Nonsilicon PSF
Item |
Type |
Grade |
3Dx32mm/51mm/64mm |
Solid, hollow nonsilicon |
Recycle |
6D/7Dx32mm/51mm/64mm/76mm |
Solid, hollow nonsilicon |
Recycle |
6D/7Dx32mm/51mm/64mm/76mm |
Hollow silicon |
Recycle |
12D/15Dx32mm/51mm/64mm/76mm |
Solid, hollow nonsilicon |
Recycle |
12D/15Dx32mm/51mm/64mm/76mm |
Hollow silicon |
Recycle |
25D/30Dx64mm |
Solid |
Recycle |
Usage: Nonwoven fabric, filling, mattress, outerwear, Jacket, coat, comforter, Spunbonded fabric, soft loft, hard padding, resin bonded fabric and so on.
Black and Color Polyester Staple Fiber
Our color fiber is solution-dyed rather than stock-dyed.
The difference between “Solution-Dyed” and “Stock-Dyed” The color fastness of solution-dyed is much better than that of stock-dyed. Our “SPRE” colored PSF use a solution-dying process in which the color is manufactured into and throughout the fiber. This gives the fiber consistent and durable color that stands up in tough environment, such as sustained direct sunlight, abrasion, or chemical exposure. We could match any sample you sent to us, both on color and quality. We will work closely with you to meet your requirements.
Item |
Type |
Grade |
1.4D/1.5Dx38mm/51mm |
Recycle |
Black |
1.4D/1.5Dx38mm/51mm |
Recycle |
Red, blue, green, brown, Navy blue, all colors are available and customized |
2D/2.5D/3Dx38mm/51mm/64mm |
Recycle |
Black |
2D/2.5D/3Dx38mm/51mm/64mm |
Solid, hollow nonsilicon |
Red, blue, green, brown, Navy blue, all colors are available and customized |
Usage: Ring spinning, O/E spinning
2 Colored Polyester staple fiber for nonwoven products, Shoes, Automotive interior, Filtration, Filling
Item |
Type |
Grade |
2.5D/3Dx51mm/64mm |
Recycle |
Black, Red, blue, green, brown, Navy blue, all colors are available and customized |
6D/7Dx51mm/64mm |
Recycle |
Black, Red, blue, green, brown, Navy blue, all colors are available and customized |
12D/15Dx51mm/64mm |
Recycle |
Black, Red, blue, green, brown, Navy blue, all colors are available and customized |
It can be used for filtration, nonwoven, interlining pad, carpet
3 The colored polyester staple fiber of low shrinkage.
Item |
Type |
Grade |
1.5Dx64mm/76mm/102mm |
Black and white |
Lower than 4% |
3Dx32mm/64mm/76mm/102mm |
Black and white |
Lower than 4% |
6D/7Dx64mm/76mm/102mm |
Black and white |
Lower than 4% |
15Dx64mm/76mm/102mm |
Black and white |
Lower than 4% |
It’s mainly used for needle punched fabric such as automotive interior, roof interior fabric etc.
Common PSF’s shrinkage is about 9%, sometimes it’s over 10%, but some industrial usage has strict shrinkage requirement, we have done many tests during production process to meet this standard, and we finally master the critical technology on how to control the shrinkage of polyester staple fiber.
Now we can supply two kinds of shrinkage.
One is within 5%
Another one is within 4%
MOQ: 20GP per color
Remarks: The method of shrinkage test condition is at 180 centigrade for half an hour.