Two Component Waterproofing materials polyurea coating water repellent harden primer for concrete floor outdoor

Share on:

Price:RUB 102.84 - RUB 367.94
Price in USD:Details


Add to Cart
  • add to wishlist

Product Overview



Two Component Waterproofing materials polyurea coating water repellent harden primer  for concrete floor outdoor

General description 
HT200 is a high performance, two-component spray polyurea elastomer resin. 
It is a polyurea elastomer resin composed of polyether, amine chain extender and isocyanate prepolymer. 
It provides a flexible, tough and elastic dense coating with good water and chemical resistance. 
Product characteristics 
It can be sprayed on any curved surface, inclined surface and vertical surface without sagging. 
Excellent physical properties, impact resistance, abrasion resistance, cold resistance, heat resistance, water resistance and aging resistance. 
Convenient to use, adjustable color and unlimited spraying thickness 
It has good crack bridging performance 
It has good adhesion to all kinds of substrates. 
It is solvent-free, 100% solid, safe and environmentally friendly. 
Product application 
Underground concrete structure, drainage pipe, manhole, etc. 
The anticorrosion of steel beams and steel pipes, steel plates, silos and storage tanks. 
The parking lot, factory, warehouse and shopping center floor. 
Waterproofing and corrosion protection of offshore structures, piers and swimming pools. 
The road ramp reinforcement and underground cavern waterproof and anti-corrosion coating. 
Foam sculpture protection


Product Description


HT200 Waterproof and anticorrosion 
  Item HT200-A
(Isocyanate )
(polyamines mixture )
Material high reactivity polyethamine , content extender methylene Diphenyklene Dissocyanate (MDI) base prepolymer.
Package 225kg/pump 200kg/pump
Viscosity (cps/25℃) 500 - 1000 400 - 800
Density (g/cm3) 1.1-1.2 1.0-1.1
Temperature setting 65 - 70 60 - 65
Mixing ratio (by volume) 1::1
Elongation (%) 400-500
Tear strength (kg/cm) > 90
Tensile strength (kg/cm2) > 16
Hardness (shore A) 85-95
Wear resistance (mg loss ) ≤100
These items are provided as general information only. They are approximate values and are not considered part of the product specification.


8_.jpg56OMYZIBZ2)$1I(GXS8QSI6.pngprimer (2).png


Surface treatment

The surface must be clean, dry and in good condition.
All oil, dust, grease, dirt, loose rust and other foreign matters shall be removed to ensure adequate adhesion. Steel, iron
Remove all oil and grease from the surface with solvent
clean according to sspc-sp1. Clean in accordance with sspc-sp10 / NACE 2, with a minimum of surface treatment and grinding to near white metal.
All surfaces shall be blast cleaned with sharp angular abrasive to obtain the best surface profile (3mils / 75microns)
All welding spatter shall be removed and all sharp edges shall be rounded.
The steel shall be primed on the same day as the steel is cleaned or before rust occurs.Whatsapp:008618265474887



Packaging & Shipping

 Component A is 210kg/iron drum;
Component B is 220kg/iron drum.
One set: 430 kg=210kg A+220kg B
One 20' container loads 40 sets/80 drums


Company Information


China Machinery Co. ,Ltd (CNMC), established in 1980, is an important and a large construction engineering equipment joint-stock enterprise Group of Shandong province, It has several wholly-owned subsidiaries, company headquarters is located at Jining Shandong province.
We have CE Certificate,SGS Product Certificate, ISO9000 Quality Control Certificate and BV Supplier Certificate, Our machine had win much good reputation through its quality and nice performance. Nowadays Our products have been exported to 127 countries and regions over the world.


0.0061 s.