IEC 61034 Wire and Cable Smoke Density Test Chamber (1600167455066)

Share on:


Price:RUB 617,459.20 - RUB 1,003,371.20
Price in USD:Details

Quantity:


Product Overview

Description

IEC 61034 Wire and Cable Smoke Density Test Chamber 

 

Smoke Density Test Chamber.jpg

introduction

 

Smoke Density Testing Equipment IEC 61034 for Cables is the testing equipment measuring the smoke generated when the cable or optical cable is placed horizontally and burn under definite fire resource in the specified condition (3m3 chamber required by IEC61034).

 

This Smoke Density Testing Equipment IEC 61034 for Cables is important to measure the smoke generation from the value of light source penetration through the smoke generated when the cable exposed to the specified standard fire source (ethanol 90±1%, methanol 4±1% and distilled water 6±1%) 1L±0.01L is burned. 

 

Standards

 

  • IEC 61034 - 1 & 2

Measurement of Smoke density of cables burning under defined condition

part 1 : Test apparatus

part 2 : Test procedure and requirements

  • BS 6853

Code of practice for fire precautions in design and construction of passenger carrying trains

 

Features

 

- Chamber internal area is 3000mm±30mm and it’s structured as Cubic Enclosure with appropriate fixed iron frame angle

- It’s configured with a door with test glass windows and in both faces of the opposite side there’s a sealed transparent window (minimum 100mmX100mm) with a horizontal light measure system that allows light penetration.

- Designed to prevent direct sunlight exposure and severe weather change in Enclosure.

- Photocell and Light Source are located in the middle part of both windows of the wall surface in the opposite side to avoid physical contact.

- A lamp to provide regular light is installed.

- Two types of auto Filter system (Carrusel) are installed to automatically calibrate the transmissivity of light.

- The reduction of light by smoke is measured using Photocell.

- In order to verify accordingly the intensity of radiation to measure light change by self-emission, the Smoke Density Testing Equipment IEC 61034 for Cables has been designed to fit various kind of filter in the Light Source.  - Support system to allow separate fitting of Light Source and Photocell in the outer wall.

-The Light Source is a halogen lamp with a clean crystal lamp and tungsten filament.

- Average power : 100W, Average voltage: DC12v, Average velocity of light : 2000 lm~3000 lm, and Average color temperature : 2800K~3200K.

- The Receptor Photocell is selenium or silicone type and has a spectrum reaction conform to Photopic Observer (similar to a human eye) of the International Commission on Illumination (CIE).

- A heating system is installed within the cube to swiftly match the standard temperature (25℃±5℃) in the initial test.

- We seek tester’s safety and convenience through an Auto ignition system.

 

Test Result

- Flameout time(min)

- Time to max Ao

- Min light transmittance (%)

- Add photo feature of carbonization area

 

Specification

 

Product Name   Smoke Density Testing Equipment IEC 61034 for Cables
Frame dimension   3,000(W) × 3,000(D) × 3,000(H)
Frame material   Stainless Steel SUS 301
Transparent sealed window   100 × 100 mm
Foundation Fixed   Fixture unit
Fixture unit   DC12V, 100W
Light Source Focus Angle   48 - 4.5  (degree)
Light Source Focus Intensity   1:20
Photo Cell-Cell Type   Selenium Cell
Exhaust Blower Fan Flow   7 m3/min ~ 15 m3/min
Exhaust Blower Size   246(W) x 220(D) x 205(H) mm
Exhaust Blower Material   Stainless Steel (Inner Fan)
Exhaust Blower Power   AC220V, 60Hz, φ1, 210W
Power   AC220V, 60Hz
Rotation Angle   0~90 ± 5  (degree )
Control Rack Dimension    730(W) * 650(D) * 1,400(H)
Our Services

 

*Consulting support. 

*Sample testing support.

*Factory Visiting

*Training support

*Installation support

*24 Hours &7 days service

 

 

Contact us

IEC 61034 Smoke density Tester

 

1600167455066
0.011 s.