A new type of microporous aeration disc developed by disc microporous aerator

Share on:


Price:RUB 766.76
Price in USD:Details

Quantity:


Product Overview

Description

Product features
The disc type microporous aerator is designed with slightly raised arch surface and ABS engineering plastics as the main body. The diaphragm of disc aerator is made of special imported rubber (EPDM) with anti adhesion surface by special processing, and the opening of microporous aerator diaphragm is selected from Germany, which ensures the quality and accuracy of the hole. When the disc aerator is aerated with oxygen, six air supply troughs are designed on the main disc surface, so that the incoming air can be directly sent to the center after buffered by the check valve, so as to ensure that the diaphragm can be easily opened with low resistance at one time. Disc aerator adopts rib anti lock mechanical assembly to ensure that the diaphragm does not fall off. When the air enters, the micropores on the air distribution film inflate to ensure that the air passes through. When the aeration is stopped, the variable micropores on the air distribution membrane are closed. Because the variable micropores on the air distribution membrane expand and contract by themselves, the micropores on the membrane passing through the disk aerator are prevented from being blocked. Secondly, a check valve device is set on the chassis of the disc microporous aerator to prevent the mixed liquid from entering the air distribution branch pipe when the gas supply of the pipeline system stops, so as to avoid the blockage caused by the mixed liquid entering the branch pipe. The air entering the disc type aerator does not need special filtration, and the intermittent aeration is not blocked. In addition, great technical improvements are made to the phenomenon that the air distribution film of disc type aerators is easy to blow and tear, and the film can not be opened or blocked. These technical reforms make it free from the pain of maintenance in long-term operation. The disc type aerator is a good product.
model
Ventilation volume (m³/h)
Standard ventilation (m³/h)
Service area (m²)
Oxygen transfer efficiency (%)
Interface (external thread)
BZP200
0.9~3.5
1.7
0.35~0.55
20~50
3/4"(DN20)
BZP260
1.5~6.0
3
0.53~0.79
20~50
3/4"(DN20)
BZP300
2.0~8.0
4
0.70~1.00
20~50
3/4"(DN20)
The design of air pipe of disc microporous aerator should consider the pressure balance and form a ring network. Each group of air inlet pipe should be equipped with valves to adjust the air volume. Design flow rate of air pipe: 10-15m / s for main pipe and 5m / s for branch pipe.
Packing & Delivery
The whole system of disc type microporous aerator is composed of disc type aerator, gas distribution pipeline, tee, cross, elbow, regulator, connector, cleaning device, etc. The gas distribution pipeline is usually arranged in a ring shape, and the disc microporous aerator is arranged in accordance with the gas supply volume and pool shape. The connection between the disc aerator and the gas distribution pipeline is connected by G3 / 4 thread, the base is internal thread (fixed on the gas distribution pipeline), and the disc aerator is external thread. During installation, the regulator is fixed at the bottom of the pool with expansion bolts according to the required size, and then the gas distribution pipeline is fixed at the bottom of the pool with hoops On the regulator, in order to prevent the disc aerator from being damaged by other operations such as electric welding spark scalding and civil concrete, the disc aerator must be installed after the completion of civil engineering and before water discharge. In order to prevent air leakage in the connection part of pipeline and disc aerator, the water shall be discharged to a depth of about 10cm above the bottom of disc aerator for leakage test, and then ventilation. If air leakage is found in the connection part of pipeline, it shall be discharged in time In addition to, and then officially put into operation. Precautions: ① in order to prevent the disc aerator from being damaged by other operations, such as welding sparks and civil construction, the installation of aeration pipeline system must be carried out after the completion of civil construction. ② ABS nozzle can be bonded without grinding, UPVC nozzle must be bonded after grinding.
Company Profile
Jiangsu Xueqing Yimei Environmental Protection Technology Co., Ltd. is located in Gaocheng Town, Yixing City, China's famous town of environmental protection. It specializes in the production and sales of various fillers, aerators, environmental protection equipment and various environmental protection accessories. For many years, we regard users as God, based on our excellent product quality, and provide batch after batch of quality for environmental protection peers and users all over the world Low cost environmental protection equipment and accessories. Main production and operation: 1. Packing series: combined packing, soft and semi soft packing; biological rope packing; elastic packing; inclined tube packing, hollow ball, ball ring, suspended ball packing, fiber ball, etc. 2. Aerator series: tup aeration hose, corundum aerator (pipe), membrane microporous aerator, EPDM tubular aerator, silica gel tubular aerator, bulk flow aerator, dynamic aerator, rotary mixing nylon aerator, swirling aerator, etc. 3. Pipe fittings series: puc-u pipe fittings, PP pipe fittings, PPR pipe fittings, ABS pipe fittings, etc. 4. Water treatment membrane series: MBR curtain membrane, flat membrane, microfiltration membrane (MF), ultrafiltration membrane (UF) and various membrane components. 5. Environmental protection equipment series: integrated dosing device, mechanical grid, sludge spiral dehydrator, filter press, filter cloth rotary filter, filter and other environmental protection equipment.
FAQ
1. who are we?
We are based in Jiangsu, China, start from 2020,sell to Western Europe(20.00%),Eastern Asia(19.00%),Eastern Europe(18.00%),South America(15.00%),Southern Europe(12.00%),North America(10.00%),Africa(6.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Water treatment filler,Sludge treatment equipment

4. why should you buy from us not from other suppliers?
null

5. what services can we provide?
Accepted Delivery Terms: null;
Accepted Payment Currency:null;
Accepted Payment Type: null;
Language Spoken:null

0.0061 s.