gas station waterproof manhole cover 900mm with 300mm middle manhole cover

Share on:


Price:$480.53 - $533.93
Price in USD:Details

Quantity:


Product Overview

Description


2(2).jpg


 



Product Description


2(1).jpg gas station waterproof manhole cover 900mm  with 300mm middle manhole coverr





















LOAD CAPACITYEN124 D400
Weight75 KGS
Qty in a pallet20 PCS
Qty in 20'GP200 PCS

_04.jpg



Advantages


 _05.jpg





Company Profile


_09.jpg_10.jpg





Product Application


_06.jpg_07.jpg





Production


_08.jpg





Test


_11.jpg


Executive standard


European standard: EN124:1994


China National Standard: GB/T 23858-2009


 


Test method


         Equipment: Loading system and measuring tools


         The loading system consists of loading equipment, rigid pads, rubber gaskets, etc.


The loading equipment should be able to provide a loading capacity of 1.2 times or more of the test load, and after measurement calibration, its loading accuracy shall not exceed ±3%. The loading test device is shown as below:


3.png























Type



Allowable residual deformation



A15, B125



CO/50 when CO <450mm



CO/100 when CO ≥450mm



C250 to F900



(1)CO/300MM(when CO<300mm,maximum=1mm)



(2)CO/500MM(when CO<500mm,maximum=1mm)



Note: For products from C250 to F900: adopt (1) when using locking devices or specially designed safety measures;


Adopt(2) When the product has not gone to special safety measures, only rely on the weight of the product to achieve safety measures.



Detection of residual deformation


Before loading, record the initial value of the geometric center position of the manhole cover, the measurement accuracy is 0.1mm


Apply the load at a speed of 1KN/S-5KN/S until it reaches 2/3 of the detected load, then unload, and record the final value of the geometric center. Finally, the residual deformation value is calculated based on the initial value and the final value. The allowable residual deformation of the composite manhole cover shall be in accordance with the above table


 


Bearing capacity test


Apply the load at the rate of 1KN/S-5KN/S until the corresponding test load F value specified in this standard. The composite manhole cover is judged as qualified if there is no crack that affects the use function.





Certifications


_14.jpg 





FAQ


_13.jpg




0.0321 s.