Share on:
New Design High Speed Low Noise Wire Automatic Industrial Wire NailMaking Machine
1 Nail making machine features: To meet market demand well, these series machines are integrated with the advantages of domestic and overseas similar products, based on normal copper tile-type model. Using antifriction bearing, high-strength clock hand, spiral alloy sleeve and bifurcated oil duct in main and side shaft, which feature machine with excellent hardness, accuracy and performance stability due to sufficient lubrication. What’s more, CN oil filling can reduce oil waste in a way. Applying Gleason spiral bevel gear to transmission part, this machine is featured with higher speed, lower noise, super accuracy and longer service time.
2 Technological process of nail making: Q195/Q235 rod coil (scrap steel edge material after rolling round by related machine)→pulley type wire drawing machine (Large scale horizontal wore drawing machine) →Nail making machine→Nail washing (polishing) machine→Packing
Wire drawing part--define which grade rebar would be used as raw material, brand new rebar would be more easily made into nails than scrap steel edge, as which would be rolled into round firstly to be prepared for nail making, more cost-saving while more time-consuming for users.
Nail making part--put drawn wire into wire feeding head, then make nail of adjusted length as semi-finished product.
Polishing part--Nail polishing machine will process the semi-finished nails into bright and smooth nails
Packing part--pack nails accordingly to clients’ requirements.
3 Principle: handle wire drawing and rust removal in one procedure with wire drawing machine, and then put nails of preferred diameter into nail making machine to turn into round nails; polish nails to desired brightness, then calculate and pack. ( drawn wire can be made into wire mesh, coop, higher and basket.)
4 Main Applications:
Used for manufacturing various steel nails, floor nails, welding strip nails, steel chain riveting, wooden chain riveting, cement nails and other metal nails. Modify some certain part of machine, users can manufacture roofing nails, staples and other special metal nails.
Model |
Diameter of nails |
Length of nails |
Designed speed |
Motor |
Dimension |
Weight |
Z94-1C |
0.9-16.mm |
9-25mm |
450pcs/min |
1.5kw |
1.5*1.3*1.1m |
1.2tons |
Z94-2C |
1.2-2.8mm |
16-50mm |
380pcs/min |
2.2kw |
1.7*1.3*1.4m |
1.45tons |
Z94-3C |
1.8-3.5mm |
30-75mm |
320pcs/min |
3kw |
2.0*1.4*1.4m |
1.8tons |
Z94-4C |
2.8-4.5mm |
50-100mm |
260pcs/min |
4kw |
2.2*1.6*1.6m |
2tons |
Z94-4C(2) |
2.8-5mm |
50-120mm |
260pcs/min |
4kw |
2.3*1.6*1.3m |
2.1tons |
Z94-5.5C |
3.8-5.5mm |
75-150mm |
220pcs/min |
5.5kw |
2.5*1.8*1.5m |
2.3tons |
Z94-5.5C(2) |
3.8-5.0mm |
75-180mm |
220pcs/min |
5.5kw |
2.5*1.8*1.5m |
2.3tons |
HR-400 |
3-6.5mm |
175-400mm |
80pcs/min |
5kw |
3.5*1.9*1.8 |
3tons |
Z94-6C |
4-8mm |
80-200mm |
180pcs/min |
11w |
3.4*1.9*1.5m |
3tons |
Z94-8A |
5-10mm |
180-320mm |
120pcs/min |
22kw |
6*2.1*1.9m |
10tons |