AZ9004320251 28/17 tooth crown wheel pinion for sinoturk howo A7 T5G spare parts (1600283933215)

Share on:


Price:$68.00 - $70.00
Price in USD:Details

Quantity:


Product Overview

Description



AZ9004320251 28/17 tooth crown wheel pinion for sinoturk howo A7 T5G spare parts


Product Description




Basin angle gear full name is called: differential active and passive gear, divided into main gear and passive gear two parts, commonly known as disk angle teeth. The single-stage reducer is a driving cone gear (commonly known as angle gear), and a slave cone angle gear. The driving cone gear connects the transmission shaft and rotates clockwise. The slave cone angle gear sticks to its right side, and the meshing point rotates downward, which is consistent with the forward direction of the wheel. Because the diameter of the driving bevel gear is small, the diameter of the basin angle tooth is large, so as to achieve the function of deceleration


AZ9004320251 28/17 tooth crown wheel pinion for sinoturk howo A7 T5G spare parts


Specification


item
value
OE NO.
AZ9004320251
Size
OEM
Length
OEM STAND
Warranty
3-6 MONTHS
Place of Origin
China
Brand Name
CARRUCHI
Certification
IOS9001
Car Model
HOWO
Product name
AZ9004320251 28/17 tooth crown wheel pinion
Application
HOWO
Tooth Profile
28/17 TOOTH
Quality
100% Professional Test
Certification
CE ROHS TS16949
MOQ
5 Set
Material
Steel
PAYMENT
T/T
SHIPPING
DHL UPS EMS FEDEX
Packing
Carton


AZ9004320251 28/17 tooth crown wheel pinion for sinoturk howo A7 T5G spare parts


Details Images




Basin angle gear is characterized by large size and weight, but it is easy to design, process and heat treatment, easy to run in during operation, abundant root strength and strong impact resistance. Generally for medium high carbon steel and medium high carbon alloy steel. Shaving, grinding, extruding, lapping and honing are the main finishing methods for industrial gears.


AZ9004320251 28/17 tooth crown wheel pinion for sinoturk howo A7 T5G spare parts


product usage




Installation of basin angle teeth:
1. Basin angle teeth should be cleaned before installation to keep the surface clean and free from rust. A set of bearing inner rings should be used at the same time. In order to ensure the correct clearance between the front and rear bearings of the driving wheel, the actual size of the bearing should be carefully measured to determine the total thickness of the gasket.
2. During assembly, the bearing should be heated to about 80-94c and then gently pressed onto the front bearing journal.
3. Tighten the nut m27x15-6g behind the driving wheel, and the tightening torque is between 400-450nm. At this time, the torque required to rotate the driving gear is between 1.0-2.5nm. Hook the flange hole with a spring scale, and the horizontal force of the pulling gear is between 16.34-40.87n.
4. After the main cone assembly is installed on the reducer housing, install the driven wheel, clean the connecting nuts and bolts of the differential housing, and apply the fastening glue gy340 and lt271 on the thread surface. Adjust the axial position of the driven gear to make the meshing clearance of the gear pair between 0.2-0.4mm, and then carry out the test run to ensure that the position of the contact spot is in the middle of the tooth surface, the small end of the front face, and the large end of the reverse face, and the width of the contact spot is generally not less than 7mm.
Adjustment of basin angle teeth
1. When the tooth top contact is too heavy (on the driven gear surface), the thickness of the gasket between the bearing seat and the reducer housing can be reduced. When the contact spot appears on the tooth root, the thickness of the gasket can be increased. Adjust the test repeatedly until the contact spot is in the middle of the tooth surface, and slightly deviates from the tooth top, which is at least 0.8mm away from the driven gear top. Never allow the tooth root to contact in a line.
2. After adjusting the spot, readjust the axial position of the driven gear to keep the tooth side between. 2-0.4mm. At this time, adjust the nuts with external threads at the left and right ends of the differential assembly to make the rotation force distance of the assembly be 1.5-3.5nm, and pay attention to tightening the locking bolts.


AZ9004320251 28/17 tooth crown wheel pinion for sinoturk howo A7 T5G spare parts


Packing & Delivery




.details1. Our packing uses export wooden cases, plastic boxes, cartons or pallets. All the package are very strong, the wooden box is firmly bound, the package is covered with a waterproof film to prevent water or damage during transportation.Before packing, we can also stick corresponding labels and shipping marks according to your needs. All our goods are well packed.
2. According to the quantity, we can use express delivery, air transportation or ocean transportation, automobile transportation, railway transportation, etc. we have our own freight forwarders, and we can also use the designated freight forwarders of customers, which can meet various delivery requirements of customers, such as EXW, FOB, CIF, etc.It can also be exported from many
ports in China.
Such as Qingdao port, Ningbo port, Lianyungang port, Tianjin port, Suifenhe River and Alashankou in China.
3. We can also send the goods by express if the customers have less goods. According to customer's request, we can use express
.such as DHL, TNT, EMS, FedEx, etc. the delivery time is 3-7. Safe, fast and convenient. It's also a good choice for you


Company Profile






Jinan carman International Trade Co., Ltd. was established in 2003. It has been engaged in the export of auto parts and construction machinery parts for 8 years. Our main business is to export truck parts and construction machinery parts to Russia,Europe and Southeast Asia, such as SINOTRUK, Shaanqi, Jiefang, XCMG, Shantui, JAC, Cummins, JCB, caterpillar, Isuzu,Yanmar,
lgmg, DCEC The company has its own warehouse in Jinan, covering an area of 2000 square meters, and has a lot of inventory,and has
the ability to quickly collect and deliver accessories. We always adhere to the quality of products as the core, to serve customers
for the purpose. Hope to be able to better communicate with friends from all over the world.


FAQ


1. who are we?
We are based in Shandong, China, start from 2013,sell to Eastern Asia(75.00%),Northern Europe(11.00%),Africa(4.00%),Southern Europe(3.00%),South Asia(2.00%),Southeast Asia(2.00%),Western Europe(2.00%),North America(1.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Auto parts,Truck parts,Engine parts,Parts for Cummins,Parts for XCMG

4. why should you buy from us not from other suppliers?
Jinan Carman International Trade Co., Ltd. is located in Jinan city, the capital of Shandong Province. Main products are heavy truck accessories, light truck parts, engineering machinery parts and so on. We have perfect service system.

5. what services can we provide?
Accepted Delivery Terms: 3-5 DAYS
Accepted Payment Currency:T/T
Accepted Payment Type: T/T
Language Spoken:ENGLISH


1600283933215
0.0097 s.