Share on:
1.LCD display Cumulative flow,Instantaneous flow,Forward flow,Reverse flow,etc.
2.Units:L/h,L/m,L/s,m³/h,m³/m,m³/s,etc.
3.Language:English
1.The sensor body is tainless steel, with dual protection, long-term stability, best choice for outdoor installation.
2.PTFE; Chloroprene rubber; PU; FEP(F46); PFA.
3.Anti-corrosion, acid
Advanced anti-interference circuit design,explosion proof and surge protection, reading stability, reduce the instability of flow meter near pump installation.
1.We offer various of flange standard,such as DIN,ANSI,ASME,BS,JIS,etc.
2.Stainless steel,anit-corrosive.
Nominal diameter | DN15-DN2000 | ||||
Velocity range | 0-10m/s | ||||
Degree of accuracy | 0.1%R,±0.5%R,0.2%R(Can be customized) | ||||
Nominal Pressure | 1.6MPa(Can be customized) | ||||
Lining Material | PTFE; Chloroprene rubber; PU; FEP(F46); PFA | ||||
Electrodes Material | SS316L; Hastelloy B; Hastelloy C; Titanium; Tantalum; Platinum;Tungsten carbide; Nickel | ||||
Flange Material | Carbon steel; Stainless Steel; Other materials(customized) | ||||
Environment temperature | Sensor | 0℃ - +80℃ or -25℃ - +120℃ or + 70 -+ 250℃ | |||
Compact type | -10℃ - +55℃ | ||||
Lining material and fluid maximum temperature | Lining material | Separate type | |||
PTFE | 100℃;150℃ | ||||
Polyfluoroethylene | 100℃;150℃ | ||||
Politef lining(F46) | 100℃;150℃ | ||||
PFA | 180℃ | ||||
Fluorosilicone rubber(FVMQ) | 250℃ | ||||
Compact type | +80℃ | ||||
Output signal | 4-20mA;Pulse;Hart;Modbus | ||||
Cable entry size | M20 × 1.5 (Standard nylon waterproof connector, optional explosion-proof metal connector) | ||||
Supply voltage | 10/220VAC(100-240VAC),50Hz/60Hz;24VDC ±10% | ||||
Communication | RS-485,Support standard Modbus-RTU protocol;Hart;GPRS | ||||
Form of electric pole | Interpolating, extrapolating electrode need to customize | ||||
Number of electrodes | Standard configuration 3-4 electrodes (two measuring electrodes plus a grounding electrode) | ||||
Flange material | Standard carbon steel and stainless steel are needed to be customized | ||||
Grounding ring material | Stainless steel, and stainless steel that contains molybdenum, etc. | ||||
Housing material | Standard carbon steel and stainless steel are needed to be customized | ||||
Level of protection | IP65/IP68 | ||||
Cable length | 10m standard configuration connecting line, optional 15m, 20m, 25m, 30m. (Remote type) |
1):Measurements are unaffected by changes in fluid density, viscosity, temperature, pressure and conductivity.
2):No obstruction of fluid components in the measuring tube, no pressure loss, low requirements for straight pipe section
3):Series nominal diameter DN3-DN3000, sensor lining and electrode materials are available in a variety of options.
4):The converter adopts novel excitation mode, low power consumption, stable zero point and high precision.
5);The converter can be integrated with the sensor or separated
6):The converter adopts 16 high-performance microprocessor, 2x16LCD display, convenient parameter setting and reliable programming.
7):The flowmeter is a two-way measurement system with three calculators: positive total, reverse total and total difference;
8):The flowmeter can display positive and negative flow, and has multiple outputs: current, pulse, digital communication, HART.
9):The converter uses surface mount technology (SMT) with self-test and self-diagnosis.
10):Rubber and polyurethane lining sensors are essentially immersive structure
11):Explosion-proof instrument case for corresponding explosion-proof places.
The electromagnetic flowmeter consists of a sensor and a converter. The product is based on Faraday's law of electromagnetic induction and is used to measure volumetric flow of conductive liquids > 50us / cm induction instrument. There are three kinds of electromagnetic flowmeters: plug-in electromagnetic flowmeter, integrated electromagnetic flowmeter, split electromagnetic flowmeter, These meters are applicable for all conductive liquids, such as:Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc
Electromagnetic flow meter is a high performance, high reliability flowmeter for measuring the volumetric flow of conductive liquids and slurries in closed conduits. Widely used in iron and steel, electric power, petroleum, chemical industry, coal, metallurgy,papermaking, water supply and drainage, food, medicine and other industries.
※ Packing:
1.The goods packed by plastic film,put into carton box with foam,then all the cartons put into a big wooden box.
2.Professional packaging staff for the package.
※ Shipment:
Support nominated freight forwarder,or we help to choose a suitable one.
(Use FEDEX;Ups;DHL;TNT;EMS;etc.)
For large quantity,recommend to transport by air/rail/sea.
※ Delivery time :
Small quantity:3-5 working days.