Share on:
Design Temperature | -40℃- 180 ℃ |
Design Pressure | 0.6 - 2.5 MPa |
Assembly Surface | ≤3800㎡ |
Diameter of port hole | DN32- DN500 |
Area of single plate | 0.03- 3.65㎡ |
Plate Thickness | 0.5 mm- 1.0mm |
Plate materia | Applicable fluids |
Stainless steel(SU304.316 ect) | Clean water, river water, edible oil, mineral oil |
Stainless steel & Ti, Ti-Pd | Sea water, salty water, salt compounds |
20Cr, 18Ni,SMO | Dilute sulfuric acid, water solution of salt matter, Inorganic solution |
Nickel | High temperature and high concentration of caustic soda |
Hastelloy | Concentrated sulfuric acid, Hydrochloric acid, Phosphoric acid |
Material | Operating temperature | Working conditions |
NBR gasket | ≤ 135℃ | Resistant to minerals, animal, vegetable oils and other non-polar media |
HNBR gasket | -5℃-150℃ | Sulfur-tolerant crude oil, H2S mixed medium, high-temperature cooking oil, etc. |
EPDM gasket | ≤ 160℃ | Heat-resistant water, steam, edible beverages, milk pasteurization |
Solvnt EPDM gasket | -20℃-150℃ | Polar volume and other good solvents such as lipid solvents, inorganic acids, alkalis, etc. |
General fluoro rubber gasket | ≤ 180℃ | Non-polar mineral oils, lubricating oils and other alcohol-containing fuel oils |
Special fluoro rubber gasket | -30℃-130℃ | High concentration of inorganic acids such as sulfuric acid |