Hot Sale Polyaluminum Chloride PAC Powder Water Flocculation Solid Yellow Powder PAC For Water Treatment (1600315893179)

Share on:


Price:
Price in USD:Details

Quantity:


Product Overview

Description







Product Type:
Polyaluminum chloride is a cationic inorganic polymer flocculant.
General chemical formula: [Al2(OH)mCl6-m] n. In the formula, n≤10, m=1-5.

Product performance:
1. The liquid is yellow-brown liquid; the solid is light yellow, brown flakes or powder.
2. The pH range of the coagulation process is wide (5-9), and the low water temperature treatment effect is good.
3. Less consumption than aluminum sulfate, good flocculation effect and low cost.
4. Low corrosiveness and convenient operation.

Quality Index:
Meet the requirements of GB-15892-2003 high-quality products, as shown in the table below,


Appearance
Liquid
 Solid
Yellow viscous liquid
Light yellow, brown flake or powder
Density g/cm3(20℃)≥
1.18
/
Alumina content% ≥
10
32
Basicity%
50 - 85
50 - 85
PH (1% aqueous solution)
3.5 - 5.0
3.5 - 5.0
Water-insoluble matter content% ≤
0.5
1.5


Applicable field:
1. Water supply purification, industrial wastewater, domestic sewage, sludge treatment, etc.
2. Papermaking glue, refractory binder, textile industry mordant.
3. Medicine, casting, machinery, tanning, cosmetics, etc.

Dosage:
1. Liquid products can be added directly or after being diluted. The solid product is weighed and used after being stirred and dissolved in the dissolution tank at a concentration of about 20%.
2. The effective dosage of the product is 20-50mg/L. Increase the dosage when treating high-concentration wastewater.

Precautions:
1. This product is corrosive to a certain extent, the dosing equipment needs to be treated with anti-corrosion, and the operator needs to be equipped with labor protection facilities.
2. This product is non-dangerous, non-toxic, no explosion and combustion hazard.
3. Solid products are packed in woven bags lined with polyethylene plastic bags, and liquid products are packed in special tank trucks or polyethylene plastic drums for transportation.
4. The solid product is hygroscopic, pay attention to moisture, and strictly prevent the pollution of toxic substances.




Q1: Are you manufacturer?
A: We are a factory and trading company integration, our factory is founded in 1985,specializes in manufacturing water treatment chemicals and providing technical service.

Q2. How to know the exact price for products ?
A: Provide your email address and detailed order info., then we can check and reply you a latest and exact price.

Q3:What’s your advantage?
A: We are one of the earliest companies producing and trading water treatment chemicals in China with over 20 years experience in waste water treatment industry.We are doing our best to lower the product cost such as the introduction of automatic production system.We have a professional team to develop the product every year to ensure the quality.




1600315893179
0.0067 s.