Direct injection type Atmospheric plasma cleaning machine/Plasma surface treatment/plasma treatment for Dispensing (1600399890640)

Share on:


Price:
Price in USD:Details

Quantity:


Product Overview

Description



Products Description


Jet plasma surface treatment system
The atmospheric low-temperature plasma processor is composed of plasma generator, gas delivery system, pressure protection system and plasma nozzle.
The plasma generator generates high-voltage and high-frequency energy, which ionizes the air in the nozzle steel pipe and is activated and controlled by the glow discharge to generate low-temperature plasma. With the help of compressed air, the plasma is sprayed to the surface of the workpiece. When the surfaces meet, a series of chemical and physical changes are produced, the surface is cleaned, and hydrocarbon-type contaminants are removed.




Picture of Jet Plasma Surface Treatment System


Equipment parameter


Product name
Rotary jet plasma surface treatment system
Model number
ZQ-DLZ600X
Gun tip
Rotating tip
power supply
220V/AC,50/60Hz
Plasma power
300-600W/25KHz(Digital circuits)
Processing height
5-15mm
Handle wide
45mm
Processing speed
0-500mm/s
Working gas
Compressed Air (0.2~0.4mpa)CDA,N2
Number of nozzles
1PCS
Maximum power
600W
Equipment size
320*441*215mm(L*W*H)


Wiring of equipment
The equipment wiring part mainly supplies power to the equipment. This equipment uses single-phase 220VAC power supply. Users can configure a triangular socket with a capacity of 10A. Configure the power cord as shown in the figure below (the power cord is integrated with the host), and the standard wiring is 2 meters long.
1. When wiring, select the wire diameter and specifications, and perform wiring in accordance with the electrical regulations to ensure safety. (This equipment requires single-strand wire diameter ≥ 1.5mm2).
2. Please ground the equipment according to the third method (grounding resistance is less than 100 ohms).




Equipment composition and operating instructions


Equipment composition and characteristics
The plasma surface treatment system mainly includes two parts: digital circuit plasma power supply and plasma spray gun.




Consumables list


Serial number
Accessory name
Specification
quantity
Replacement cycle
picture
Remark
1
Plasma nozzle
ZQ-DLZ600X-4015
1
According to the use environment and frequency (3-6 months)
2
Rotating device
ZQ-DLZ600X-6301
1
According to the use environment and frequency (8-12 months)
3
Arc starting device
ZQ-DLZ600X-3442
1
According to the use environment and frequency (3-6 months)
4
Strap
ZQ-DLZ600X-8535
1
According to the use environment and frequency (3-6 months)
Viton material






Our Factory








Q: How to buy your products ?
A: We have some products in stock , you can take away the products after you arrange the payment ; If we don’t have the products in stock you want, we will start production once getting the payment.
Q: What’s the warranty for the products ?
A: The free warranty is one year from the date of commissioning qualified.
Q: Can we visit your factory ?
A: Of course, welcome to visit our factory if you come to China.
Q: How long is the validity of quotation ?
A: Generally, our price is valid within one month from the date of quotation. The price will be adjusted appropriately as the price fluctuation of raw material in the market.
Q: What’s the production date after we confirm the order ?
A: This depends on the quantity. Normally, for the mass production, we need about one week to finish the production.


1600399890640
0.0071 s.