Large bubble aerator used in fish pond (1600404030674)

Share on:


Price:$2.00 - $2.30
Price in USD:Details

Quantity:


Product Overview

Description



Product Description


Vibrating aerator
The vibrating aerator belongs to the disturbing diaphragm type. Each aerator is composed of a corrosion-resistant, high-strength ABS engineering plastic chassis and a special synthetic rubber diaphragm with long service life. The aerator is equipped with an air discharge port (circular type) which can prevent scaling at the lower part of the using component, distributed on the same arc, with a hole diameter of 5mm, and the DC plate on the chassis can ensure that the air is around The diaphragm is designed to act as a real check valve to reduce the amount of debris and reservoir entering the air pipe to the bottom when the air flow stops. The convex block on the chassis is matched with the special shape notch on the diaphragm to reduce the diaphragm damage by high pressure air, so as to eliminate the fatigue fracture and boundary stress fracture under all loads


Details Images




Product characteristics
1. Not blown out under pressure
Generally, the low-pressure air delivery is normal, such as the sudden explosion of extreme air pressure and the embrittlement beyond the time to blow out the usual aeration cap. Even if the pressure of the vibrating aerator is over 0.6MPa, it will not blow out the cap. Even the rubber cap will hold the chassis tighter. This is not available in other diaphragm aerators.
2. The check valve acts to keep debris out of the system
The smooth top surface of the chassis can prevent the adhesion and settlement of debris. This feature, together with the greater toughness of the cap, ensures that when the air supply stops, the larger diameter of the chassis and cap can increase the pressure on the upper liquid surface, and make the cap on the chassis tighter. This combined check valve can minimize the chance of debris and water entering the aerator. The bottom part of the air hole on the outside of the chassis is equipped with a ring structure at a certain interval, which can make the air bubble evenly distributed on the whole diameter of the aerator, thus ensuring excellent oxygen transmission effect:
A. The air hole outside the aerator, combined with its own cleaning function, makes the aerator not blocked.
B. Notches are used to strengthen the lip of the pin to prevent movement
C. The cap is arranged on the chassis to move. It will not be pressed out even under extreme pressure
D. Cap material adopts special formula, so it can keep toughness for a long time
E. The top surface is smooth, so that the debris does not stick or settle on the chassis.
Vibration aeration can replace diaphragm aerator in use. It can meet the requirements of aeration in municipal, chemical, residential and tourism wastewater treatment systems. It can work effectively in the original device or in the new device


Specification


Name 
5''
Working ventilation capacity (m3 / h) 
0.3-2
Design ventilation capacity (m3 / h)
1.8
 Service area
(M2 h)
0.20-0.5
 Oxygen charging capacity (kgo2 / h)
0.141-0.597
Theoretical dynamic efficiency (kgo2 / kW. H)
3.5-5.4
Resistance loss (PA) 
< 3000 
Oxygen utilization rate(%)
30


Company Profile


The company is a design and development, production and manufacturing, sales and service as one of the aerator production enterprises. After years of hard work and innovation, the company has cooperated with many famous domestic universities in the early 1990s to develop the series of microporous aeration products in sewage
treatment, which has formed a diversified product structure. There are already a series of flat aeration heads, arch aeration heads, tubular aerators, liftable aerators, oxidation ditch aeration series, environmental protection fillers and accessories And
other products.


Company products




Construction effect




Product packaging


Packing in cartons free of charge. If wooden cases or other special requirements are required, part of the cost shall be added


FAQ


Q: Hello! I have some questions that you need to help me answer, can I?
A: Yes, I am very happy to answer your question.
Q: What is the acceptable MOQ?
A: Two cartons for minimum order quantity.
Q:Can you customize the trademark?
A:Brand and product can be customized
Q: What is the delivery time?
A: For sample, we usually have stock, so the delivery time will be quite short.
For normal order, the delivery time should be in two weeks.
Q: What is acceptable pay term?
A: T/T.
Q: Do you provide sample?
A: We can offer free sample for test, and customer needs to pay the freight charge.
Q: Thank you for your answer.
A: I am very happy to serve you!


1600404030674
0.0129 s.