Filling nozzle Quantity
Suitable dosing raw material
Synthetic fatty acid glycerides, glycerinated gelatin, polyethylene glycol, etc.Synthesis of glycerol fatty acid glycerides, glycerinated gelatin, polyethylene glycol, etc.Synthesis of glycerol fatty acid glycerides, glycerinated gelatin, polyethylene glycol, etc.Synthesis of glycerol fatty acid glycerides, glycerinated gelatin, polyethylene glycol, etc.
Store barrel capacity
Working press pressure
The voltage of the power
380V/3/50HZ OR 220V/3/60HZ
1. Forming part:
Film material on the film s plate(PVC/PE)through the gripping agencies into forming area to preheating film——>forming mold——>blowing film——>blown film forming .
triangle knife cut edge technology,the dotted line cut.
2. Filling part:
One nozzles filling,for forming suppository one time embedded filling,filling precision±1%,material barrel with electric-heating insulation system,top with a stirring motor so that drug keep uniform state,the drug in the barrel through cycle pump into filling nozzles,one time filling the remaining drug cycle through the other end of a raw material barrel to do the next filling.
3. Cooling part:
Filling the entire row of drug finished then into cooling frame,cooling box external with chiller block,cooling wind through condensers in the cooling box to cooling suppository on the cooling rack.
4. End seal and coding parts:
After cooling the solid suppository into sealing area:pre-heat mold——>seal mold——>type mold.Then cut the finished products a group for six granules or five granules (according to customers requirement).
2.The filling part with removing static electricity system
Note: before forming shell reach filling place if without this device because trace drug filling and close shell top position will along the shell wall climb up a small hill under the static electricity function reach suppository sealing part will affect the quality of behind the seal
3. Stirring barrel speed adjustable system
Note: because of the drug material different and the viscosity different maybe the same stirring result can not mix drug uniform before filling so that affect finished suppository products drug content.
4. Cooling speed adjustable system
Note: because of different drug different components maybe need different cooling speed; when the cooling speed too slow will reduce the whole machine production efficiency. If the cooling speed too high maybe due to drug suddenly drop temperature then fracture therefore cooling speed need adjustable
5. Cutting granules quantity can be adjustable system
Note: according to customer s requirement can convenient set up finished products granules as 4/5/6/7granules.