RTV-1 Heat Conductive Silicone Adhesive

Share on:


Price:
Price in USD:Details

Quantity:


Product Overview

Description



Products Description




Thermal Conductive Silicone Adhesive
It is a thermally conductive silicone RTV adhesive rubber developed for heat sink applications.
SS-3941 is a 1-Part silicone that when applied to the substrate enables adhesion to parts and heat transfer of the bonded assembly within minutes.
When cured, the elastomer resists weathering, ozone, moisture, weathering, ozone, moisture, UV and high temperatures.
It works well in manual and automatic dispensing.



Application






Use thermal adhesive paste to glue heat sinks to LEDs, CPUs, and other heat-generating components.
PCB board heat sink,electronic component heat transfer
Adhesive sealing of components ,part fixturing with heat dissipation capability
Power unit adhesive,solar unit fabrication
Form in place gaskets,electrically conductive sealant
EMI/RFI silicone shielding, automotive and specialty assembly heat transfer



Product Features


Primerless adhesion to most plastics, metals and glass
High thermal conductivity
Provides strong electrical insulation
High tensile strength
Bonds well to a wide variety of substances
Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
Service temperature -45 to 260
Non-corrosive,waterproof ,solventless


Technical Parameters


Model 
HY595D
HY595HD
HY583H
Appearance
White 
White
Gray
Density(g/cm3 )
1.5±0.2
1.5±0.2
1.5±0.2
TFT(min)
20~40
20~40
5~30
Curing speed (min /24)
3.0
3.0
3.0
Shear tensile  (Mpa)
1.0
1.0
0.8
Shore A
30~50
30~50
30~50
Volume resistance (Ω·cm)
1.2×10 12
1.2×10 12
1.2×10 12
Thermal conductivity (W/m·K)
0.7~0.9
1.0~1.2
1.6~2.0
Service temperature(℃)
-45~260


Product packaging


Aluminum tube: 100 ml/tube, 100 tubes/carton
Cartridge packaging: 310 ml/tube, 50 tubes /carton


Operation Process


1. The surface of the joint should be free of oil stains, dust, impurities, etc.
2. Cut the glue nozzle into the required size and shape according to the process requirements;
3. Cut off the sealant seal, install the glue nozzle, and put it into the glue gun;
4. Apply the sealant evenly to the joints, the thinnest part is greater than 1mm; when using a pneumatic glue gun, the air pressure is controlled at 0.2~0.4Mpa;
5. The product can be trimmed using traditional methods after the surface is dry.
.


Certifications




R & D




In the field of adhesives, we are not only a manufacturer, but also a total solution provider covering bonding, sealing and potting processes.Since its establishment, our company has always adhered to the scientific development concept, and regards technology research and development and personnel training as the company's development goals. Our company has set up a special technical research and development department, and has a technical research and development team with high education, rich experience and strong innovation ability. The company has 6 senior engineers, 4 intermediate engineers and 10 professional technicians, with an average age of about 40 years old. The company pays attention to the recruitment and training of talents. The company recruits technical R&D personnel for a long time and continuously enriches the R&D team. At the same time, the company regularly conducts professional training for existing talents, and also arranges organizations to observe and study in other enterprises, so as to continuously improve the professionalism of R&D personnel. knowledge and innovation. The company also attaches great importance to the research and development of new products. Every year, it invests a lot in the research and development of new products and has achieved great results.




Exhibition






Company Profile




Zhengzhou Huayu Technology Co., Ltd., founded in 1997, is a national high-tech enterprise focusing on the R & D, production, sales and service of adhesives and sealants. Baofeng high tech Zone factory covers an area of more than 30000 square meters and a construction area of more than 40000 square meters. It has an advanced automatic production line and a design annual production capacity of 50000 tons.
JIAGU® RALEAD® With more than 20 years of innovation and development, the products cover ten materials such as silicone, modified silane, polyurethane, ms polymer epoxy, anaerobic, acrylate, CR, SBS, PVC and ABS, epoxy potting compound ,silicone potting compound and more than 300 products. They are widely used in aerospace, rail transit, automobile and vehicle, electronics and appliances, new energy, building curtain wall, door and window decoration and other fields.
The company has a bonding technology center and intellectual property rights to provide customers with professional products and application solutions; The products have been certified by many authoritative institutions at home and abroad, and have obtained a number of invention patents, scientific research achievements and award certificates. In 2015, it was listed on Shanghai equity
trading center with securities code of 204322.
Bond with glue, bond you and me! Adhering to the concept of "industrial glue quality, construction glue price", the company meets the needs of customers and develops together with customers.


FAQ


Customer service time:
Professional and technical customer service will receive 24 hours a day, and reply within 1 hour. E-mail and call consultation
Sample:
After the sample is sent to the customer and tested, according to the temperature, humidity, use environment, the bonded object can be considered by the customer. Consult the technical customer service
Delivery time:
Since the customer's sample test is correct, mass production and delivery can be carried out within 15 days after the payment in advance is successful. The specific delivery method can be based on the customer's intention
Product reference:
In case of special use products, use requirements can be provided. Consult customer service and promote applicable products online
OEM/ODM:
If you need to order products, please call customer service or email directly to discuss cooperation methods


0.011 s.