We are the manufacturer of rubber tapes. Supplier of Home Depot, Aery Dennison, Aptiv...
Passed SGS, 16949, DUNS.
Self-fusing / Self amalgamating electric insulation water proof Rubber Mastic Tape
Our model are by contrast ** model
BLJ-10(122):
self-adhesive insulation tape is a kind of rubber-based electrical tape with good flexibility and insulation. It has special red
release liner which will not stick on the tape when unfolding. BLJ-10 tape is applicable for insulation protection with voltage
level equal to and below 10kV, and could be used for all kinds of solid medium insulation layer power cables.
BLJ-30()W963:
self-adhesive insulation tape is a kind of ethylene propylene rubber based insulation tape with good flexibility and self-fusion.
It has special release liner which will not stick on the tape when unfolding. Vulcanizing is not required for BLJ-30 tape. This
tape has good and stable insulation, which is applicable for low voltage insulation and voltage insulation up to 69kV. It could be
used for all kinds of solid medium insulation layer power cables.
BLJ-76(L7600):
an ethylene propylene rubber based high voltage tape possessing excellent electrical, chemical and physical properties.
BLJ-76(L7600) is a linerless, self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a
uniform, void-free build-up. The excellent stretch of BLJ-76(L7600) allows conformability to the most complex shape and contour.
BLJ-76(L7600) is compatible with all extruded dielectric cable insulations.
INSULATING AND JACKETING TAPE FOR USE THRU 69KV
Linerless, Self-bonding, Outstanding corona and ozone resistance, High thermal conductivity, Flame retardant, UV resistant,
Excellent moisture, corrosion and chemical resistance.
RECOMMENDED USES: For insulating and jacketing of splices on power cable from 600 volts through 69,000 volts and for building
stress cones and jacketing of terminations on power cable from 600 volts through 35,000 volts. Insulate and protect bus bars and
joints.
BLJ-28(RM1000):
RM Tape is a self-bonding mastic tape which consists of an ethylene propylene rubber (EPR) backing, bonded to a tacky, temperature
stable, electrical grade mastic. Use for insulating and moisture sealing splices and terminations on solid dielectric cable..
Provides excellent electrical properties, superior adhesion, moisture and chemical resistance. For primary insulation up to 2kV.
SELF BONDING MASTIC TAPE
* Excellent electrical properties
* Superior adhesion
* UV resistant
* Moisture, corrosion, and chemical resistant
* Suitable for direct burial
BLM-66(F100):
a self-amalgamating, insulating mastic for insulating and sealing all types of overhead and direct buried electrical connections.
It has super adhesion, anti-corrosion. For high voltage cable ends water sealing with continuous operating temperature up to 90℃.
It is suitable for insulating protection of cable connection up to 1000V jacketed with vinyl tape. It is suitable for protecting
cable joints, tube and cable ends.
PERMANENTLY SEAL AND INSULATE SUBSURFACE OR OVERHEAD LOW VOLTAGE
ELECTRICAL CONNECTIONS
-Available in roll and pad form
-Superior adhesion to metal, all types of cable insulations and jackets
-Excellent thermal stability
-Impervious to water, salt water, soil and corrosive chemicals
-Will not adversely affect cable insulations or polymeric conducting shields
BLJ-20(B500):
a butyl based medium voltage tape possessing excellent electrical, chemical and physical properties. It is a self-amalgamating
tape that maintains a tight insulation build-up for void-free electrical stability and permanent resistance to moisture
penetration. The excellent stretch of BLJ-20(B500) tape permits fast taping speeds and uniform build-up with normal taping
techniques. BLJ-20(B500) is compatible with all extruded dielectric cable insulations.
INSULATING AND JACKETING TAPE FOR USE THRU 46kV
-Self-amalgamating
-Outstanding Corona and ozone resistance
-UV resistant
-Excellent moisture, corrosion and chemical resistance
RECOMMENDED USES: For insulating and jacketing of splices on power cable from 600 volts through 46,000 volts and for building
stress cones and jacketing of terminations on power cable from 600 volts thru 35,000 volts. Moisture seal for telephone joints and
other waterproofing needs. Insulates and protects bus components.
Want more information? Contacdt with us today!