Uae 12mm 3mm Melamine Pine Construction 18mm White Oak Buy Online Bending Chair Plywood

Share on:


Price:$10.00
Price in USD:Details

Quantity:


Product Overview

Description





Products Description






Core:
Poplar, Hardwood, Combi, Birch, eucalyptus, as your requirement.
Grade:
BB/BB, BB/CC, CC/CC, CC/DD,DD/EE, etc.
Glue:
MR/E0/E1/E2/Melamine WBP/Phenolic WBP
Size(mm)
customized


Thickness(mm)


2.0-25.0mm
1/8inch(2.7-3.6mm)
1/4inch(6-6.5mm)
1/2inch(12-12.7mm)
5/8inch(15-16mm)
3/4inch(18-19mm)
Moisture
Below 16%
Thickness tolerance
Less than 6mm
+/-0.2mm to 0.3mm
6-30mm
+/-0.4mm to 0.5mm
Packing
Interior packing:0.2mm plastic;
Outside packing:bottom is pallets, covered with plastic film,around is carton or plywood, strengthen by steel or iron 3*6


Quantity
20GP
8pallets/21M3
40GP
16pallets/42M3
40HQ
18pallets/53M3
Usage
Usage adequate for making furniture or construction, package or industry,
Minimum Order
1*20GP
Features:
wear-resistant,anti-cracking,anti-acid and alkaline-resistant
Delivery Time
Within 20 days received deposit or original L/C at sight


APPLICATION SCENARIOS




we have persistent pre-shipping inspection system.The inspection process starts immediately after order is confirmed.The grade and type of raw material,processing methods and significant points will be advised to the factory management.Our long years experienced inspectors team will check each order during production process and befor shipping.An inspection report in uniform format will then be provided to our customers.Based only on the inspection report a decision in rendered whether shipment is allowed or will need further re-processing and inspection.






Multiple styles


We have hundreds of different styles for you to choose from. If there is no style you like here, you can contact us for more patterns, or you can send your own needs to us, and we can provide customized services for you.




OEM/ODM




It can be used for veneering, making soft bags, furniture, handicrafts, and plates including E0, E1, E1, car bp2
Can provide cutting, chamfering, punching, profiling, carving, edge banding, veneering, various special-shaped can be processed, accurate size, price concessions!
The surface can be painted and pasted with wood veneer, melamine surface, photo frame and storage stool, with good strength!


PRODUCT FEATURES


Durable
The wear-resistant, corrosion-resistant and compact linear granular bamboo panel makes the surface very smooth. For decades, it has been used as high-end decorative materials in Europe


Good quality
1.Light Weight, suitable for the high-rise buildings and bridge construction
2.Corrosion Resistance: No pollution to concrete surface
3.Good weather resistance, can withstand temperatures -10℃~50℃
4.The pouring surface is smooth,no need for secondary plastering,shortening the construction period and reducing labor cost.
5.Can be sawed, nailed, High-strength


Beautiful
Choose our wood panels to save costs and protect the environment, adding vitality, beauty and dazzling color to the house or enterprise




Maintenance of plywood formwork
The formwork construction process is made more efficient because of the use of modern formfork technology, which includes the use of phenolic film faced plywood. It is coated on both sides with phenolic film and is suitable for multiple use and smoother surface. The number of times used depend on the followings:
1). Sealing of Edges
Phenolic fabric film faced plywood edges are fully sealed at the factory and it is most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should be sealed as soon as possible with waterproof paint.
2). Sealing of Holes
Any holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes.
3). Cleaning and Repair
To obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiff brush. It may be necessary to use a hardwood scraper but care should be taken not to damage the plywood face. Do not use a wire brush or sharp metal scraper to dislodge hardened concrete.
4). Storage
Always clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face to face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly





About us




Zhengzhou Dongmei brothers Wood Industry Co., Ltd
Established in 1998 and located in the middle section of Zhenglu Road, Zhengzhou Economic Development Zone, Dongmei brothers Wood Industry Co., Ltd. is a supporting enterprise for furniture and cabinet factories specializing in the production and processing of MDF, creative board and multi-layer melamine veneers. It has convenient transportation and is adjacent to sigang linkage Avenue in the East

The phase I project of connecting National Highway 107 to the West invests in four of the most advanced press production lines in China. It has many years of business practice and a high-quality professional production team. It processes more than 100000 pieces of various plates every year, and has nearly 1000 colors for customers to choose. It has bright colors, exquisite workmanship, strong three-dimensional sense and clear patterns

Since its establishment, Dongmei brothers wood industry has always adhered to the principle of "survival by quality and development by service", pursued the enterprise concept of "product equals character", and established a good reputation in the industry. We will, as always, adhere to the business philosophy of "integrity-based, win-win cooperation and common development". Warmly welcome new and old friends from all walks of life to patronize and guide us, and work together to create a better future!




FAQ


Q: are you a manufacturer? 
A: Of course! Our factory is located in Zhengzhou City, Henan Province, China. With more than 20 years of manufacturing experience, we will provide the best price and quality wood. 

Q: what are your main products?
A: Coated plywood, commercial plywood, fancy plywood, polyester plywood, medium density fiberboard, etc. 

Q: where is your main market?
A: We are a people-oriented company. Our main markets are Southeast Asia, the Middle East, South Africa, Russia and South America. 

Q: what are your terms of payment? 
A: 100% sight L / C
30% prepaid by T / T, 70% sight L / C
30% in advance by T / T, 70% by T / T upon seeing the copy of bill of lading. 

Q: how long is your delivery time? 
A: Generally 15-20 days after receiving the advance payment. In case of emergency, there is no problem in 7 to 10 days.


0.012 s.