Factory wholesale fire alarm addressable manual call point

Share on:

Price:RUB 1,294.58 - RUB 1,370.73
Price in USD:Details


Product Overview


Factory wholesale fire alarm addressable manual call point


overview for manual call point  


The AW-AMC2188 addressable manual call point (manual call point for short) is mainly designed to be used with an intelligent two-bus control panel. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control panel which will, after receiving the alarm signal, display the coded address and the equipment status of the manual call point. When the manual call point is operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit. The manual call point supports electronic coding and has a built-in fire telephone jack and a PHONE indicator, making its engineering application convenient.


features for manual call point


  It can realize complete electronic coding and in situ rewriting with help of a coder.

  Designed with an upper cover and a lower cover, it can be installed, debugged and maintained  conveniently.

  It is designed with a two-wire fire telephone jack and is therefore more applicable to engineering application.

  Designed with passive output contacts, it can control other external equipment directly through an intermediate relay.

      The pressing sheet on the manual call point will not get crushed after it is pressed, but can be reset by a special tool, so it can be used repeatedly.



Manual Call Point Basic introduction


Addressable Manual Call Point




Reset key for resettable, Addressable




Host Machine

Addressable Fire Alarm Control Panel AW-AFP2188















Manual Call Point Technical Parameters


Executive standard: GB19880-2005
Operating voltage: 24V (pulse modulation)
Operating current: <300uA (in the monitoring status); <
2mA (in the action status)
Output contact: Normally open contact; capacity: 0.1A/30VDC
Wiring method: nonpolar two-bus system (L1, L2)
Operating environment: Indoor, temperature: -10°C~+50°C; relative humidity: ≤95% (40°C±2°C
, without condensation)
Telephone jack: Two-wire fire telephone jack (equipped with a standard  6.3 single-track audio connector).
Starting part: A plastic pressing sheet that may be used repeatedly. It can be manually reset with a special tool after being pressed.
Starting mode: Press the pressing sheet manually.
Indicator: The red ALARM indicator will blink in the inspection status or remain lit in the alarm status; the PHONE indicator will blink when a fire telephone loop is connected, otherwise it will be out.


pictures for manual call point


pictures for manual call point



 4. Manaul Call Point AMC2188.jpg

pictures for manual call point





pictures for manual call point










0.0518 s.