Share on:
Tong torque system consists of tong torque load cell, tong torque gauge (installed in the driller display), and hydraulic hose. Load cell installed in the wire line of the power tong, when the drill pipe screws, it will be the pulling force which is proportional with the tightening torque on the wire line rope. This pulling force act on hydraulic fluid through piston of load cell, connect wire line to transmit on the bourdon tube of the gauge. The bourdon tube moves, it makes the pointer through the movement, then indicates the force of the power tong. Use power tong or casing tongs, May not use load cells, connects wire line in power tong or in casing tongs hydraulic pressure source directly. | ||
Features | ||
CTP Series | ||
Indicates make-up or breakout torque (in pounds of line pull) for all oilfield tubulars. | ||
6" fluid filled gauge. | ||
Operator adjustable target pointer that the driller sets to a corresponding torque requirement. | ||
Models and variations of available to work with all manual tongs. | ||
Capacity ranges from 10,000 pounds to 30,000 pounds of line pull. | ||
CTT Series | ||
Indicates torque in foot pounds applies to each joint when using power tongs to run oilfield tubulars. | ||
Models available for all makes and models of power tongs. | ||
Tension or Compression style load cells available for use in all power tong configurations. | ||
Wide variety of capacities available to suit all applications and tong configurations. | ||
English, Metric or dual scale variations available. |