ATNJ New Upgrade LCD Log periodic Ceiling Antenna Dual band lte Signal amplifier (60439606116)

Share on:


Price:RUB 9,805.15
Price in USD:Details

Quantity:


Product Overview

Description

Product Description

 

Global  application ATNJ factory DUAL BAND 850/1900MHZ  2G/3G/4G signal repeater

DUAL BAND  Pico repeater is applied specifically in small area indoor DAS system. The base station signal is coupled and amplified by Pico repeater into in building system. The amplified signals is transmitted by indoor antenna. Meanwhile the indoor antenna receives the cell phone signal, and send the signal to the base station as uplink. This method can eliminate the signal dead spot, reject the interference, provide the stable signal communication for cell phone users. This Pico repeater mainly solves the problem spot problem in building. The coverage area is as large as 3000 square meters in open space, and 1000 square meters in partial obstacle area, 500 square meters in complete obstacle area. The edge power level for coverage area is above 85dBm. The repeater output power level is less than 20dBm.  

Pico Repeater is a bi-directional amplifier that allows for the reception of signals, amplifies the signal and re-transmits into areas where there is no or very low signal level coverage enabling a mobile user to establish a call connection.

Pico Repeater can be deployed in indoor coverage and dead area. It is especially advantageous to use in 100M2-1000M2,which is a very economical solution. The output power is up to 20dBm per carrier.

Meanwhile, it can also boost the speed of GPRS.

 

 

Packaging & Shipping

1,GSM900&3G 2100MHZ BOOSTER ×1
2,POWER ADAPTER×1
3,LOG-PERRIODIC ANTENNA×1
4,CEILING ANTENNA×1
5,16M CABLE×1

6,MOUNTING ACCESSORIES

Technical spec.

 

SPECIFICATIONS

Specification

Frequency Range (Customers to Choose)

Uplink

824-849MHz&869-894MHz

Downlink

1850-1910MHZ&1930-1990MHz

Frequency Bandwidth (3dB Bandwidth)

25MHz&75MHz

Gain

≥ 65dB

Automatic gain control (Step Attenuation)

31dB @ 1dB/ Step

Auto Gain Control

20dB Min.

Output Power(Customers to Choose)

17-23dbm

Spurious Emission

≤ -15dBm/30kHz

9kHz~1GHz: ≤ -36dBm/30kHz

1GHz~12.75GHz: ≤ -30dBm/30kHz

Inter-Modulation Attenuation ACPR

≤ -38dBc / 30kHz (measured under rated output power)

In-band Ripple

≤ 5dB

Voltage Standing Wave Ratio

<=2

I/O Impedance

50 Ω

Noise Figure

≤ 5dB

System Delay

≤ 5μs

RF Connector(Customers to Choose)

N-Type (Female)

Operating Temperature

Operation: - 10°C ~ + 55°C / Storage: -20°C ~ +60°C

Power Supply

AC 220V±20%, 50/60Hz(AC 220V/ DC9V/9A power adapter)

Dimensions

225*140*35 (mm)

Weight

1 kg

Alarm Monitoring System

Alarm for uplink self-oscillation

Indication LED

Power supply, Run,Alarm

 

 

Functions

1,Intelligent to guide the installation with LCD
2,Real time display the signal strength.
3,Automatic dormancy when no user make the calling
4,initiative reminding when device damaged
5,Automatic detect the installation mistake and provide the corresponding solution with LCD

 

 

 

 

Detailed Images

 750_01.jpg750_02.jpg750_03.jpg750_04.jpg750_05.jpg750_06.jpg750_07.jpg750_08.jpg750_09.jpg750_10.jpg750_11.jpg

 .jpg

 

 

60439606116
0.0079 s.