1. Food Grade: 18/8 304# stainless steel, Silicone O ring;
2. Processing: Whole 2 litre beer keg body stretching by Round Plate without welding;
3. Special Treatment: Pickling passivation and Magnetic polishing to eliminate metallic taste;
4. Better sealing: Thread lid is better way to keep draft beer carbonation for 2 weeks.
Best Bachelor Party Gift Food Grade carbonated mini 2 liter beer keg with laser printing
200 mm H X 135 mm W
1/2 gallon, 64oz fluid ounces (1890 ml)
Stainless steel cap with thread
Diameter 33.5, screw pitch 1.5mm
Imprint method and area
Screen Print (320mm w x 90mm h), Etching (160mm w x 90mm h) or Laser (420mm w x 90mm h)
Tapping system Option
Twist spear, Single quick connector spear, Double quick connector spear.
More Capacity options
1 gallon (3780 ml) and 5000 ml
These are very easy to pour from and come with a gasket on the top to allow for bottle conditioning.
Pls notice the beer hose should reach the bottom of 2 litre beer keg to reduce foam.
Backpack drink dispenser would be best choice for Draft beer vending in stadium during sports events.
Max carrying 2 gallons of draft beer via 2 pcs of one gallon 2 litre beer keg.
People love to fill their favorite draft beer and enjoy happy time with friends.
The 2 litre beer keg is easy to carry and can keep cold in Jockey box for outdoor parties.
5l keg with twist tube spear
5l with double quick spear
2l nitro coffee maker
2l growler with tapping system
growler with sleeve
growler with big handle
glass growler with tapping system
4l growler with tapping system
Leaks gas as soon as the cartridge is installed
1.Make sure the regulator dial is off turned all the way counter close
2.Tighten the cartridge seal
Replace the CO2 cartridge it is damaged
The tap is open, but no beer comes out
Make sure the CO2 cartridge is installed, the cap is turned on, and pressure is indicated on the pressure gauge.
Tap continues to drip ,
without stopping when closed
1.A few drips after closing the tap is normal. But it should not drip over time.
2. If the keg and tapping system is clean, internal O-ring may have worn through use and be in need of replacement.
Beer pours foamy every time (more than1/4 cup of foam)
1.First pour may be foamy if the beer line is full of air after being filled or the tap assembly has been allowed to warm up. Second beer should pour fine, if that's the case. Keep out of the sun.
2.Beer may be highly carbonated from the bar or brewery. If beer in keg is pressurized at 5 psi but came from brewery beer line pressurized at 25 psi, beer will pour foamy until the pressure equalizes after few days in the keg.
Be sure to open the tap handle fully and let go during the pour. Attempting to meter the flow during the pour can lead to foaming.