Share on:
Rubber recycling machine for making rubber powder
Brief introduction of automatic machine for recycling used tire
Tyre used tire recycling machine is used for recycling the scrap tires, (either nylon tires or radial tires ) to get rubber crumb.
The steel wire can also be separated from the tires and sold to the market and make profit.
It is a high profit project and brings you a lot fortune.
More important, it is eco friendly during processing.
30% energy saving than other similar products sold on the market . The invester will save losts of money on power consumption by using our newly designed plant .
Working procedure of used tire recycling production line:
Waste tires--Whole Tire shredder(Or tire ring cutter --tire strip cutter--Tire slicer machine)--Tire debeader ( Steel wire separator)--Vibrating screen--Magnetic separator--Belt conveyor--Rubber powder Mill crusher--rubber powder
The function of the automatic machine for recycling used tire
If you are seeking more convenient method to recycle the scrap tires,whole tire shredder will be a good option.
It can directly shred the whole tires into small rubber chips.
No need to cut step by step.
Greatly improve the crushing capacity and give sufficient rubber supply for the following rubber grinding system.
More pictures of the automatic machine for recycling used tire
1.Ring cutter
This machine mainly used to cut the sidewall of steel wire tire ,and then to the next step of segmentation .First, put the tire on the platform, then rotate the hand wheel , the three claws will stick the inner tire firmly ,Second ,Starting power,work platform will rotation ,cutting tool according to need to cut tire slowly step by step . until the tire side cut off.
Item | Specification |
Ring cutter |
motor power | 5.5 | |
Speed of main screw | 46.8 r/min | |
Max Diameter of tyre | 1200mm | |
Dimension | 1100*900*1700 |
2.Strips cutter
strips cutting machine can cut cycle machine to remove the wire tire sidewall cut into strips ,and the width of the adjustable section .Two circular knives for special materials ,hard and durable , can be used repeatedly grinding for no more than 1200 steel tires.
Item | Parameter | Strips cutter |
Motor Power | 5.5kw | |
Disc Diameter | 380mm | |
Rotate Speed | 18.4r/min | |
Dimension | 1290*870*1550 |
3.Block cutter
Block cutter is designed to cut car, truck and rear tractor tire. range is up to 120cm truck tires. the tire cutter adds flexibility to your total tire cutting system by providing you the opportunities of accepting tires up to 120cm into your system ,The unit also allows your system to cut 60-70 truck tires per hour or 120-150 car tires per hour.
Item | Specification | Block cutter |
motor power | 11kw | |
Speed of main screw | 420 r/min | |
Out diameter of cutter | 200mm | |
Dimension | 1130*830*1100 |
4.Bead wire separation
Be utilized to separate rubber and steel wire of bead in order to get whole steel wire .
Feature:It is easy operation ,easy to be installed and maintained high efficiency and clean etc.
Item | Specification |
Bead wire separation |
Motor power | 15 KW | |
Linear speed of front roller | 15.5 m/min | |
Ratio of speed | 1.1 | |
Dimension | 1520*1150*12101mm |
5.Tyre crusher
This machine is mainly used to crush waste tire and rubber .the structure is gear transmission
6. Selection and transportation system
Fully-auto waste tire recycle line
Usage:
It could be applied to cut all kinds of rubber blocks and strips. It is good for cutting rubber tyre, rail tyre, rubber strips etc.
Construction & Principle: :
It mainly consists of the motor, cutting blades, static blades, frame, oil cylinder, hydraulic system, control box, etc.
Its basic principle is: The oil cylinder and hydraulic system are driven by a motor. Put the tyre without wire bead on the stand of the static blades. The tyre is fixed by locking arms tightly then cut by the blades driven by oil cylinder. The tyre is cut into several blocks, which will be more easily crushed or shredded for the next process.
Technical Data:
Model: | 900 | 1200 |
Capacity(pcs/h) | 10~30 | 20~40 |
Handling tire(mm) | ≤1000 | ≤1200 |
Main power(kw) | 5.5 | 7.5 |
Working pressure(mpa) | 8 | 12 |
Length of Blade(mm) | 680 | 800 |
Cylinder Hydraulic(mm) | 125 | 150 |
Weight(T) | 1.2 | 2.2 |