3-color Tally Light
Both front and rear side
There is front and rear TALLY lights for with 3 colors display (Red,Green,Yellow), and controlled via DB-9 ports on the rear panel.
New extended screen hood, to acquire the ideal visual effect in almost all environments.
Flexible Battery System
The A7 has a flexible battery system that supports F970, D28S ,V Mount and E6 battery plate of your choice.
2. Vector Scope
4. Embedded Audio Monitoring
5. Focus Assist (Red, Green, Blue three colors optional highlight over parts of the image in focus)
6. False Colors
7. Zebra Exposure
8. Check Field (Gray/ Red/ Green/ Blue)
9. Camera Mode
10. Pixel to Pixel
11. Center Marker
12. Safe Frames (80%,85%,90%,93%,96%,2.35:1)
13. Ratio marker (4:3,13:9,14:9,15:9,16:9,1.85:1,2.35:1)
14. Mark Color (Red,Green,Blue,Black,White)
15. Image Flip (Horizontal, Vertical, Hor&Ver)
16. Image Freeze
17. Color Temperature Adjustment
Video Analysis Assistant Pattern
Waveform / Vector scope / Histogram
Waveform monitoring consist of R,G,B,Y(Lumilance),Cb and Cr waveform,which used for mesuring the brightness,luminance or chroma values from a video input signal,It not only can warm the user for out-of-range conditions such as overexposure errors,but also assist with colour correction&camera white and black balance.
Vector scope shows how saturated the image is and where the pixels in the image land on the color spectrum. It can also be displayed in various sizes & positions, that allows users to monitor color gamut range in real time.
Histogram consist of RGB, Color, Y, R, G, B histograms
>Color histogram:shows the red,green and blue channels in overlay histogram.
>RGB histogram:shows histogram for each of red,green and blue channels.
>Luminance histogram:shows the distribution of brightness in and image as a graph of luminance
The three modes can be selected to meet user's best needs and view visually the exposure of whole and each RGB channels.Users have the full contrast range of video for easy color correction during pist production.
A7 supports Waveforms display under both SDI and HDMI, including Y, Cb, Cr, R, G, B channels, and full scale display of each channel. The Vector scope and R/G/B histogram can be switched on/off independently to the waveforms.And the waveform background can adjust transparent to black.
Embedded Audio Monitoring
The Audio Level Meters provide numerical indicators and headroom levels. It can generate accurate audio level displays to prevent errors during monitoring. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB.
Peaking Focus Assist
The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. You can switch the putline color between red, green, blue according to different tone of the subject.
The Exposure is used to assist in exposure adjustment in the mode of Zebra Pattern, it is considered overexposed and displays the moving warning lines onto the over exposed areas.
(4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1). Frame blanking zone includes 6 Levels,from1-6 (Transparent to Black). You can switch the Mark color between red, green, blue, white and black according to different tone of the subject.