FP-551 High Quality Immersion Instant Water Heater Element
The Water Heater Element, those metal components that get red-hot and generate heat, are the most important parts of any range. When the elements fail to heat properly, it's time to replace them. It's a simple procedure any electric stove owner can easily accomplish in a few minutes' time. You can usually identify a burnt-out element by blistering or small holes on the element's coils. A burner that plugs into a receptacle is easy to test, just unplug the non-heating burner, plug it into another working receptacle, restore the power to the range, and test it. If the burner works, you know its original receptacle is probably faulty. If it doesn’t work in the good receptacle, the burner is bad and must be replaced. Do not be alarmed if a new element smokes a little when you first use it. This is a factory-applied green coating, that prevents scratches during shipment, burning away.
Water Heater Element
Application of Water Heater Element
* Micro brewery * water boilers * Heating bath water * petrochemical application * vending machine * general industrial use * Special elements are available * corrosive liquids, highly viscous oils, high pressure or hazardous areas.
Specification of Water Heater Element
* Material: Stainless steel304,316,321,Incoloy800,840 * Voltage: 220v,customized * Power: 1500w,customized * Length: Customized/recommended by engineers based on power * Diameter: 8mm-25mm * Flange/thread: BSP, NPT (1", 1 1/4", 1 1/2", 2", 2 1/4", 2 1/2"),or any customzied size
Technical datas of Water Heater Element
* Power tolerance: +5%, -10% * Size tolerance: ± 3m * Cold pressure capacity: 1500v/0.5mA/S * Hot pressure capacity: 1250v/0.5mA/S * Leakage current: When rated voltage is used, leakage current * should not exceed 0.5mA.