MK-102 curing agent
1.Clean the oil on the male and female thread and make it completely dry before using MK-102
2.Put the curing agent into small drum, while adding while mixing until evenly.
3.Use ash scraping knife to put MK-102 evenly on the surface of male and female thread.
4.According to API standard to recommended torque up.
5.The coupling has coated MK-102 should be completed in 45 minutes on the buckle.
After adding the curing agent, curing reaction will begin immediately, at normal temperature, keep the consistency of the mixture can work for 45 minutes to 2 hours, when temperature up, curing time is reduced, when temperature down, curing time increases, when the temperature reaches 550°F, it can open the sealed curing joint. Temperature is too higher or too lower, may affect the curing ability.