|The mininum order
||PE or blister packing for each single one, then 100pcs per middle box, then the outer carton
||T/T 30% deposit in advance, the balance should be remitted before shipment oy by L/C
|Time of delivery
||within 30days after receiving 30% deposit
1. This product is made of barrel ,plunger,piston,needle,needle sheath and end cap.
2. This barrel should be clean and transparent enough to easy observe.
3. Barrel and piston matches well and it has a good property of sliding,can easy to use.
4. Plunger is easy convenient for handle and usage.
5. Needle sheath can provide physical protection to the needle tube;end cap can tighter enclose the extenede part of plunger and push-button.Those design can protect the product better.
1. Sterilized by EO gas, non-toxic, non-pyrogenic, single use only.
2. Sufficiently transparent barrel allows easy measurement of the volume contained in the syringe and detection of air bubble.
3. Graduated scale on the barrel is easy to read. Graduation is printed by indelible ink.
4. The plunger fits the inside of barrel very well to allow for free and smooth movement.
5. Material for barrel and plunger: Medical gradePP(polypropylene).
6. Material for gasket: Natural latex / Synthetic rubber(latex free).
7. With or without needle
1. Product sterilized by Epoxy hexylene, asepsis,non-pyrogen without unusual toxicity and hemolysis response.
2. This for the clinical disposable use, use after opening.
3. Stop use if package is punctured or the protective cap falls off.
4.For single use, damage after use.
5. The term of validity is five years, Expired is forbid.
6. The product should store in the relative humidity not to surpass 80%, non-corrosiveness gas, cool, ventilates good, in dryly clean room.
Above-mentioned content can't be changed without authorization
Q: What we specialize in?
A. disposable sterile syringe /needle, BCG AD syringe, disposable infusion set, disposable transfusion device, disposable venous transfusion needle, disposable asepsis vaginal dilator etc.
Q: Can we provide samples?
A: Yes, we offer samples, but some samples need to be paid, sample charges would be returned after you place orders.
Q: Can you visit your factory?
A: Yes, we will always warmly welcome you to our factories.
Q: What are your aim markets?
A: We looking forward to serive customers from all over the world.
Q: How to order from us?
A: 1st. send inquiry to us with your detailed requests.
2nd. we communicate and confirm products details
3rd. we make samples for your approval.
4th. after the sample is approved, 30% deposit paid in advance and we order raw materials,then start the production
5th. by the end of bulk production we send shipping sample for your approval.
6th. after confirming the shipping sample,the balance of 70% need to be paid before shipment
7th. after receiving the balance, we arrange the shipment upon your request .
8th. send you all the documents for custom clearance.