What is Non-explosive demolition / cracking agent (Brand:SPLITSTAR®)
Non-explosive demolition / cracking agent is a soundless and safe demolition agent which is quite different from ordinary demolition agents such as explosives and dangerous materials. It does not cause any fly rock, noise, ground vibration, gas, dust or any other environmental pollution when used properly.
As requirements for demolishing rock and reinforced concrete in construction increase in tight quarters, the use of explosives and explosive agents is becoming more restricted as far as safety and environmental pollution problems are concerned. Non-explosive demolition / cracking agent is the solution.
Non-explosive demolition / cracking agent is a powder with amazing 18,000 PSI expansive strength when mixed with common water. Poured into holes, Non-explosive demolition / cracking agent breaks reinforced concrete & rock safely and quietly, while providing SILENT cracking.
Since Non-explosive demolition / cracking agent provides controlled demolition according to drilling patterns, it is very easy to break reinforced concrete and all kinds of stone into desired sizes and shapes, without noise, vibration or dust.
Reinforced Concrete Demolition & Cutting
In demolition, concrete cutting & excavating industry, Non-explosive demolition / cracking agent helps you to break reinforced concrete and rock into chunks, so you may easily cut off rebar, haul it away with a crane or truck without damage remaining part.
Rock Breaking & Excavation
In mining and quarrying industry, Non-explosive demolition / cracking agent helps to achieve perfect slabs and blocks from limestone, onyx, marble, granite or any other type of stone you are working with. Compares to blasting, Non-explosive demolition / cracking agent avoids waste of valuable stone, high insurance, costly storage and labor.
Stone Quarrying & Dimension
Non-explosive demolition / cracking agent can also be applied along with traditional methods like primer cord, hydraulic breaker, diamond blade saw and jackhammer to help cut cost, work time and increase safety, Plus its silent operation, Non-explosive demolition / cracking agent is perfect for residential, school, hospital and airport area.
Alternative to Blasting, Breaker, Jackhammer, Diamond Saw...
Non-explosive demolition / cracking agent helps your work to become more efficient and cost effective.
A. Granite, marble, sandstone, limestone, quartzite quarrying and cutting
B. Rocks pre-splitting, fracture, cutting, demolishing and removal
C. Controlled demolition or cutting concrete when explosives not allowed
D. Fracture and demolition of the concrete buildings and structures
E. Rocks cutting for road construction
F. Excavation of trenches and foundations
G. Underground excavations and removing boulders
H. Marine excavations including underwater operations
Package & Storage
Container and Storage Non-explosive demolition / cracking agent is packed in 4 anti-moisture bags of 5 kg (11 lb.) each and then placed in a water proofed carton with a total weight of approximately 20 kg (44 lb.).
Although Non-explosive demolition / cracking agent is packed in anti-moisture paper bags, long storage may cause deterioration of its working ingredients. Therefore, store in a dry place and use it as soon as possible.
When storing, do not place the bags of Non-explosive demolition / cracking agent directly on floor, put them on a pallet and keep in a dry warehouse etc. Non-explosive demolition / cracking agent, stored in this manner, can be effectively used for about 1 year.
Non-explosive demolition / cracking agent should be unpacked before use.
When storing the portion of Non-explosive demolition / cracking agent remaining after use, push the air out of the bag, then seal with gum tape and use as soon as possible. However, as it may get exposed to moisture there is a risk of Non-explosive demolition / cracking agent losing its effectiveness once the bag has been opened.
If you receive broken bags of Non-explosive demolition / cracking agent, they may not work due to chance of moisture absorption.
Depending on usable temperature, there are 3 types of Non-explosive demolition / cracking agent:
As shown in following picture, place a thermometer in the bottom of the hole and leave it in place for 2-3
minutes. Then quickly pull out the thermometer and take a reading.
NOTE :Avoid taking temperature right after drilling since the temperature of the hole is higher because of
Benefits of usingSoundless Demolition Agent
Packaging & Shipping
Packing term: 5kgs/plastic bag(anti-moisture),4 bags/carton, 50 carton/one ton, one ton by wood pallet or crate.
MOQ is one ton, and this material only can ship by sea, because it is chemical powder.
We have two main business field:
1) All Drilling and Quarrying equipments
2) Natural Stone Processing/Cutting/Splitting machines
Our products range:
1. Expansive mortar (non-explosive demolition agent, soundless cracking agent)
2. Hand-held rock drill Y6,Y20, Y24, and Y26 (pneumatic),TY24C
3. Fully hydraulic rock drill BH26, BH28 (with pushing cylinder)
4. Pneumatic rock drill with pushing air-leg YT18, Y19A,YT24, YT28
5. Internal combustion rock drill (hand held, gasoline) YN27
6. Line drilling machine
7. DTH driller, diamond wire saw
8. Button bits, cross bit, chisel bits
9.Plug hole rod, Extension rod, shank adapter,coupling sleeves
10. DTH hammers & bits,DHD, COP, IR, Bulroc and SD series
11. Diamond wire rope, hydro-bag (steel), air bag (polymer) for blocks pushing
12. Stone cutter for block cutting
13. Hydraulic splitting machine
14. Wedges & feathers
15. Hose (for air, water, hydraulic...)
Xiamen Bestlink Factory Co., Ltd is committed to provide the best drilling and cutting machine, tools and accessories products in marble and granite stone quarrying, as well as in civil engineering application, especial demolition project. it is now a leading manufacturer of cutting and drilling equipment for the extraction of marble, granite and ornamental stones in china.
we offers a vast range of hydraulic and pneumatic drills and machines for diamond wire cutting as well as all kinds of accessories for quarrying activities.
With years of experience,our quality products are being exported to more than 45 countries all over the world including USA, and Europe with high reputation.
Factory and Workshop
1. Methods of Payment:
T/T (Telegraphic Transfer) or Western Union or L/C at sight
2. Handling time for an order
Within 10 days supplied from stock or within 25days after getting deposit for bulk order
3. Shipping way
By sea ONLY for expansive mortar
4. Quality Control
We have our own experienced QC.
There will be strict inspection and testing for every order before shipping out.
5. After Sale Services:
a. Our sales team will response for your question within 24 hours (Holidays Excluded)
b. Technical Support will be available in any time
c. Free replacement will provide once the failure confirmed caused by our product quality