Low foam, water base, environmental friendly, unoil and degrease, used for non ferrous metal , cleaning agent (60691414442)

Share on:


Price:RUB 72,341.57
Price in USD:Details

Quantity:


Product Overview

Description

VCI-601 Low Foam Water-base Cleaning Agent

  • Product description

VCI-601 low foam water-base cleaning agent is environmental protection, mainly by low foam surface active agent, penetrant diffusion agent, anti rust agent, high-quality special cleaning agent made of. Does not contain heavy metals, phosphorus, nitrite and other controlled substances. Green non-toxic, harmless, can be completely biological degradation.

  • Purpose

Used for cleaning ferrous metals, stainless steel, copper, aluminum, magnesium, zinc and its alloys and other non-ferrous metal parts surface oil, grinding oil, cutting fluid, rust oil, dust and other pollutants.

  • Product features

1. The low bubble even has no bubble, and is especially suitable for high pressure spray cleaning. The product is weakly alkaline, high concentration, strong ability to remove oil. It can quickly remove all dirt and stains on the surface of the product, cleaning force is greater than or equal to 99%.

2. With strong penetration, dispersion, solubilization, emulsification.

3. Less dosage, can be fully dissolved, long service life, easy to rinse,need to clean the spot off  before cleaning , and it will protect the metal surface will not get corrosion in a short time.

4. Green environmental protection, high efficiency, safety, economy.

  • Physical Properties

Product Model

VCI-601

Appearance

Slightly yellow transparent liquid, no irritating odor

Density(g/cm³)

1.2±0.05

Viscosity(@40℃mPa.s)

0.98

Material compatibility test

No influence on iron and steel, copper, aluminum, stainless steel, ceramics, plastics, glass, etc.

PH value( original liquid)

7.0-10.0(5% concentration)

Poisonous and harmful check

Non-toxic, harmless, non irritating response

 
Biodegradation

Completely biodegradation

  • Application guidelines

1. Before using this product, you should read the instructions of the product and use it under the professional staff. The cleaning method can be used in spray, heat immersion, ultrasonic cleaning, manual cleaning and so on.

2. According to the severity of the oil pollution to allocate the concentration of the cleaning fluid while using. In order to obtain the best cleaning effect, its normally use the cleaning agent and water to mix the concentration of 5 to 8% cleaning liquid, heating to 55 ~ 80, spraying or ultrasonic cleaning 3 to 10 minutes, use the rinsing clean it at first,then drying or directly drying. The cleaning liquid concentrations increase can inprove the cleaning ability.its much better by hand wipe cleaner.

3. If the oil fouling is very heavy or meet the high melting point lipid,should use labour or mechanic ways to shovel the sludge, then clean.

  • Notice

1. According to the number of oil pollution adjustment cleaning liquid concentration, after cleaning the product according to the requirements of the surface cleanliness of the product to determine the post processing.

2. In order to prevent the second pollution you need remove that oil slick on the surface.

3. You should be regularly add 1% to 3% of the cleaning agent every day. If the cleaning effect is not good, you need to change a new cleaning liquid.

4. Please do not make this product contact with eyes, if the product accidentally splashed into the eyes, you need to use the flow of water or physiological saline rinse clean; can not swallow this product, if swallowed, do not have to rush to spit. Please keep the rest status, and timely medical care.

5. In order to prevent the skin from being skimmed, please wear chemical resistant gloves when operating.

 

01.jpg601_02.png601_03.png601_04.png601_05.png601_06.png601_07.png601_08.png601_09.png

 

 

 

60691414442
0.0053 s.