1.5 Inch Very Small Lcd Screen JHD144B2605
US $0.01-$1.00
2020 Wholesale Price Good Quality LCD LVDS Driver Board PS-7233-A Transfer Board 2K to 4K V By ONE Adapter Plate Interface
- Category: LCD Module >>>
- Supplier: Shenzhen,Talentcar,Electronic,Co.,Ltd.,[Guangdong,China]Shenzhen
Share on:
Product Overview
Description
Wholesale price good quality LCD LVDS driver board PS-7233 A transfer board 2K to 4K V By ONE adapter plate interface
Product Description
PS-7233-A doubles the pixels (1920*1080@60Hz → 3840*2160Hz@60Hz conversion) of the video signal output (Full-HD signal by LVDS interface) from a TV control board and then supplies the 4K*2K@ 60Hz video signal to a panel provided with V-By-ONE input. It supports 0/1/2 Division V-By-One data format out.
PS-7233-A also supports 4 port LVDS UHD input (3840*2160@30Hz),and convert to 3840*2160Hz@60Hz to drive various 8 lane V-By-One UHD panel.
INTERFACE DIFINITION
All connecting plug-ins recognize tacitly the square pin as No.1 pin. The pin definition also refers to PCBA bottom silkscreen. No.1 pin of 2.0/2.54mm pitch sockets show as below picture:
CN2 (4PIN/2.54): POWER INPUT CONNECTOR(*Note1)
NO. | SYMBOL | DESCRIPTION |
1 | GND | Ground |
2 | GND | |
3 | 12V | +12V power supply |
4 | 12V | +12V power supply |
*Note1: Please leave it open default,use for software update.
Generally do not need a separate power supply, LVDS input 12V, can only be used to upgrade the software.
CONFIGURATION & GENERAL PRECAUTIONS
| Storage temperature: -10~60°C. |
Operation temperature: 0~40°C.
l Operating: 10% to 90% (Non-condensing)
l Store: 5% to 95%
l Operating: 10,000ft (max)
l Store: 20,000ft (max)
l Vibration 5-55Hz, 19.6m/s²(2G), 20minutes each along X, Y and Z axis.
l Protect the board from static electricity in case of damage to the IC.
l Keep the board away from conductor when it is working.
l Don't push or pull the connectors when the board is working.
l Don't press, distort or disassemble the board.
l Clean the board with soft dry cloth when it's dirty.
l Don't wire in the board to power supply before panel is correctly connected.
l Inner wires of the whole set should match reasonable, we suggest the LVDS twisted pair wire between the main board and panel must be tied up well and try to use shielding wire. If it's possible, try to put on the magnetic belt ring on the wire which near the board terminal, each connected wire try to not directly cross the PCB board, especially cross over from the main chips, avoid affecting the whole set EMC performance.
product picture
FUNCTION LAYOUT
Wiring diagram:
Company Information
| Shipping | DHL, FedEx, UPS, EMS, TNT, HK POST, CHINA POST......etc |
| Payment | L/C, T/T, Western Union, PAYPAL.... |
30% Deposit in Advance and 50% Balance Before Shipment By negotiating. | |
| After Sales Service | Replacement will be provided as free if any item defective during warranty period. |
Any question please contact our saler for helping. We are of service at any time. |
