Оцинкованная сталь ADSS/OPGW кабель фитинг нижний свинцовый зажим для башни/полюса (60768376350)

Share on:


Price:
Price in USD:Details

Quantity:


Product Overview

Description



Product Description


Galvanized steel ADSS/OPGW cable fitting down lead clamp for tower/pole









Pls contact us for more information about fiber optic cable related fittings & accessories on pole/ tower.





Metal Cable Joint Box

Cable Joint Box is sold as an assembly. A Cable Storage Shelf and Fix Clamp are needed when installed on the tower,. A Cable Storage Shelf and three Stainless Steel Bands are needed when installed on the pole.



Down Lead Clamp

Down Lead Clamp is designed to lead down cables on splicing and terminal pole/tower and to fix the arch section on the middle reinforcing pole/tower. Normally, a unit of Down Lead Clamp is needed 1.5meters, and it is also used in other fixing area.



Preformed Tension Set 

Preformed Tension Set is widely used for the installation of bare conductors or overhead insulated conductors for transmission and distribution lines, the reliability and economic performance of the product is better than the bolt type and hydraulic type tension clamp that widely used in the current circuit.
Innovative structure and precision design, so that the preformed tension set has a reliable performance and it is usually made of aluminum clad steel, galvanized steel wire and other materials.



The Preformed Suspension Clamp

The Preformed Suspension Clamp is the connecting hardware of ADSS cable hang in transmission line pole (tower). It can reduce static stress at the support point and increase ant-vibration ability of ADSS cables, and cushioned against the dynamic stress of aeolian vibration. as well as ensure that the cable bending will not exceed the permissible values, make the cable does not produce bending stress, so that the fiber optic don’t produce extra loss in the cables.



Structure


the structure of ADSS/OPGW fiber optic cable related clamp sets







Structure and Raw Material:


Shackle--Hot dip galvanized steel. Shackle is connected with Reinforcing Pole units.

Twisted Chain Link--Hot dip galvanized steel. Twisted Chain Link is intended for connecting U- Shackle and Clevis Thimble.

Thimble---Hot dip galvanized cast steel. Thimble is plugged in shackle of Tension Clamp for protection and connection.

Armor Rods----- Aluminum clad steel wire. Armor Rods increase friction with a layer of particle emery inside to cables. Rods are assembled into four subsets in workshop which reduce misalignment errors and speeds installation. The ends are bent outward to provide stress relief at the critical cable departure areas.

Preformed Dead End -- Preformed Dead End are made of hot dip galvanized steel wire or aluminum clad steel wire, it is assembled into one subset with a layer of firm emery inside in workshop, in order to increase gripping strength of Tension Clamps while decreasing side pressure.



Direction


1. It is designed to connect continue pole (tower) and Terminal pole(tower), tensile pole or line angles above 25。Pole (tower). The special specification: one unit per Terminal pole (tower), two units per tensile pole (tower), two units per continue pole (tower).

2. You can select the Specification Model corresponding to the appropriate cable diameter range, maximum allowable tension (MAT) or Span Length from Data Sheet.



Application


Tension pole Clamps are designed to connect ADSS cables and poles/towers . Armor rods can provide protection and cushioning to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can’t cause undue stress to the ADSS cables, so as to ensure the normal lifetime of cables system.





Company Profile




Our Services:
1.Send us your inquiry ,we will revert back to you within 12 hours.
2.Adopt strict process and raw materials control to guarantee the life span of 30 years.
3.All our products are well tested,we provide you with test report and certification.
4.We sincerely welcome customers home and abroad to visit our manufactory.



Our Services:
1.Send us your inquiry ,we will revert back to you within 12 hours.
2.Adopt strict process and raw materials control to guarantee the life span of 30 years.
3.All our products are well tested,we provide you with test report and certification.
4.We sincerely welcome customers home and abroad to visit our manufactory.



Packing & Delivery


Packing: carton/wooden box, or as required.

Delivery: 5-10 working days after payment, depends on quantity



FAQ


Q1.About the price?
Re.We usually quote within 12 hours after we confirm the technical data of your products.

Q2.What's the payment method?
Re.We accept L/C,T/T,Western Union,MoneyGram,PayPal etc.


Q3.What are your terms of payment?
Re.30% in advance,and 70% before shipment

Q4.How to ship the items to me?
Re.Courier(DHL,TNT,FEDEX,UPS,EMS),Airfreight,Ocean Ship are available.

Q5.How long is your delivery time?
Re.The general delivery time is 5-7 days after order confirmed,it depends on the order quantity.

Q6.Can you send me a free sample?
Re.Yes,We are willing to send free sample,if you would like to pay the shipping costs.

Q7.Do you accept OEM or ODM?
Re.Yes,we're factory. any your customized requirements we can do our best to help you realize.



Contact Us


Website: //sl-fibercable.en.alibaba.com / www.sl-fibercable.com
Skype: live: .cid.c2c5934cb9b6f846
Email: [email protected]
Tel / wechat / Whatsapp: +86 15581639772


60768376350
0.0086 s.