The main things you need to determine are the diameter of the poles, the length of the poles,the color of the poles and whether the poles are aluminum, fiberglass, carbon fiber or steel.
HOW TO MAKE FIBERGLASS POLES:
There are 2 types of poles:
(1) Poles with inserts -the insert is a tube (or sleeve) that is typically glued inside one hollow end of a tent pole section and protrudes approximately 3". This insert allows you to stack one section on top of another.
(2) Poles without inserts-these are hollow poles (sections) with no inserts
To make a set of poles it is usually best to map out on paper to determine how many sections and parts you many need of each. You will usually need more sections with an insert than those without. For example if you want to make a pole with 4 sections (this would make a 6 foot long pole), you would need to have 3 sections with an insert and 1 without an insert. The reason you need the last section to be without an insert: picture stacking one section with an insert on top of another. If the last section has an insert, that would not allow you to put an endtip into both ends of the pole. Therefore if you use a section without an insert for the last one you will have a hollow end on both ends of the pole, this allows you to put an endtip on each end of your pole.
Specifications
6.9mm , 8.5mm, 9.0mm, 9.5mm diameter aluminum camping tent poles
Aluminum tent pole: custom oxidation color as request .
Pre-Bending tent poles
Aluminum tent rod
6061 6063 aluminum canopy poles
Applications
They are wide use on camping tents, Military tents, Individual tents, Disaster relief tents,Beach umbrella ....etc.