RTSM-1.0BJD laboratory horizontal bead mill is Root self-deseign/manufacturing new-type integrated dispersing bead mill. RTSM-1.0BJ(D) has very wide application. The finish size can be from D90=100nm to D90=20mcron. It is the ideal model for research institute, university lab and Scientific researchers. RTSM-1.0BJ(D) can be applied for the production of pesticide SC, pharmaceutical material, textile printing inkjet ink, digital printing ink, glass inkjet ink, ceramic ink, MLCC, phraphene, nano coating, flourscent brightener, electric paste, positive and negative pole material etc.
· Steady Working
RTSM-1.0BJ(D) adopts Root assembly type double-end mechanical seal, with good sealing and steady working. The coolant for mechanical seal can be changed based on different material to avoid the potential cross pollution due to leakage.
· No Grinding Dead-corner
RTSM-1.0BJ(D) adopted turbine and pin grinding structure, avoiding the traditional disadvantage of uneven distribution of the grinding media and failure of rotating the beads due to low speed. The grinding media under the force of high linear speed and new grinding structure can get the most energy to form a even moving track, thus to enhance the grinding efficiency and no grinding dead-corner.
· Self-protection system for safe working
1) Air pressure protection, material pressure protection, water pressure protection, material temperature protection etc. All these points are set in control box, once the pressure or temperature has passed the set values, the machine will stop work to protect itself.
2)When mechanical sealing cooling oil is lower than normal lever, the machine will stop automatically for self-protection
TECHNICAL DATE FOR RTSM-1.0BJ(D) LAB HORIZONTAL SAND MILL
Grinding chamber volume: 1.0L
Outer chamber material: SS304
Advantage: Easy maintenance and less corrosion
Inner chamber material: wear resistant hard alloy / silicon carbide
Advantage: High wear resistant
Grinding rotor material: Hard alloy / zirconia
Grinding rotor structure: pin+turbine
Main shaft material: SS304
Bearing: Imported SKF
Grinding chamber working pressure: 2KG
Grinding chamber dismantle: Suspension arm, easier for maintenance
Mechanical sealing type: Assembled double end mechanical sealing. Longg durability , easy maintenance.
Dynamic-Static ring material: wolfram carbide. High wear resistance. It could form a perfect water/oil film to prevent the material going into the mechanical sealing. Better sealing performance
Mechanical sealing support material: stainless steel(304).
Material transportation system
Material Feeding: ARO Pneumatic diaphragm pump
Material Discharging: static discharge
Separate material: Wolfram carbide
Electrical and Control system
Motor Brand: Customized (Standard: Wannan Motor)
Power Supply: Customized (Standard: 38V 50HZ 3PH)
Operation: Push Button / PLC control
Air pressure protection, material pressure protection, water pressure protection, material temperature protection etc. All these points are set in control box, once the pressure or temperature has passed the set values, the machine will stop work to protect itself.
When mechanical sealing cooling oil is lower than normal lever, the machine will stop automatically for self-protection