MAX POWER 360 WATT OUTPUT, DO NOT OVERLOAD - The dimmer kit is compatible with 360W Max for 110-120v LED Edison Vintage Weatherproof Outdoor string lights by End-to-end together. Plug-IN dimmer ONLY works with DIMMABLE waterproof bulb string light, both incandescent and LED. Otherwise, the remote dimmer switch will not turn lights on or off or dim. Make sure your light bulbs are dimmable before purchasing.
4 TIMING FUNCTIONS, 4 DIMMABLE MODES & STEPLESS DIMMING - The outdoor dimmer has 4 Blue bottons 0.5H 1H 2H 4H on the remote, control the lighting time. Avoid forgetting to turn off the strings. Convenient, energy saving and environmental protection. 4 brightness level (100%, 75%, 50%, 25%) and Increase/ Decrease Brightness Button allows you to adjust lights to desired level. Turn On or Off your Outdoor Lights from inside ONLY by clicking the remote button, and even on Bed.
1. Plug the dimmer into protected outlet and connect the device into the dimmer outlet.
2. Remove the plastic battery tab from the battery compartment in the back of the remote control to activate the DC 3V Type CR2025 pre-installed battery.
3. Carefully consider the number of Bulbs and the total wattage while connecting dimmer, refer to following chart. Do not exceed 360 watts, all Bulbs combined.
CAUTIONS & WARNINGS
The dimming kit operates by 120V AC power only. Do not use any other type of power supply.
When using the remote control for the first time, make sure that the battery is in place and remove any plastic protection sleeves that may be alongside the battery.
Disconnect power at source prior to connecting cord set, installing light bulbs into stockets.
Do not operate light string with any open sockets.
Do not connect cord set to light strings during rain or other inclement weather conditions.