Model number | Flexitank / flexibag |
Material | 100% Virgin PP + food grade PE |
Suitable for | |
Capacity | 16-24KL |
| Top loading/discharging Bottom loading/discharging |
| 1. Traditional 3" butterfly valve with anti-suction devise 2. Revolutionary 3" ball valve a) Compared with butterfly valve, ball valve is sealed more tightly and with better resistance to pressure. There is no block when valve is opened, which make liquid flow through freely and quickly. b) In the joint position between internal valve and flexitank, a safety protection device is added. This device could effectively prevent inner film blocking the valve, and make residual liquid the minimum after discharging. 3.valve with 2" or 2.5" quick connector for choice |
| Hard PP instead of steel to reduce the pressure against the flexitank surface thus reduce the risk of failures. |
Safety Pin | Added on 3" valve to help to source thefting activities if happened during transportation. |
Automatic Air vent | The special design of air vent could automatically release air pressure when it is more than 0.0065Mpa inside of the flexitank. It would keep the cargo and flexitank safe during loading and transportation. |
Upgrading on protective out PP woven bag
| Our engineers tracked and tested 1000 pieces of flexitanks at different transportation modes and conditions. We made those of the following revolutionary upgrading: a)Protective out layer of BLT flexitank is 8m seamless tubular construction which would eliminate longitudinal seams. b)Protective out layer of BLT flexitanks are made of high-tech aramid fibers, and it has incomparable advantage at tension and softness performance against ordinary PP fibers. c)Each 10cm between woven of the protective layer, there is a high strength zonal reinforcing rib. Their application will make an innovative upgrade in the flexitank safety area. |