electric engine power 4kW, CE approved, ARPAL AM-60E

Share on:

Price:RUB 88,103.50 - RUB 135,679.39
Price in USD:Details


Add to Cart

Product Overview


The wood chipper AM-60E is designed for processing and recycling by cutting branches, laths, boards, slats and other wood waste. The shredder of the branches turns the raw material into pieces with a length of 5...8 cm, this size is not regulated but depends on the diameter (thickness) of the raw material. The wod chipper AM-60E is able to cut branches up to 6 cm in diameter, depending on the moisture and wood species. Chopped branches are ideal fuel for pyrolysis and solid fuel boilers, fireplaces, stoves and other heating appliances, as well as for the production of charcoal. The productivity of the AM-60E makes up to 2 cubic meters of finished products per hour. Productivity depends on the raw materials and on the quantity of the personnel involved in work.
The wood chipper AM-60E is equipped with an electric motor with a power of 4 kW with a power suply of 380V. On the shredder is installed the engine control panel which has a system of engine protection against overloads. The installation of the electric motor makes it possible to use the chopper of the branches inside the premises without fear of the harmful exhaust gases of the gasoline drives.
The working element of the wood chipper is knives. The wood chipper AM-60E has 6 knives, have a double grinding angle and necessarily pass the heat treatment process on a modern HIGH FREQUENCY INDUCTION HEATING MACHINE installation. Cutting knives are inserted into the milled groove of the working shaft, this technology significantly reduces the load on the fixing bolts of the knives.
The wood chipper AM-60E is completely produced at our enterprise. We control the quality of all stages of our production, all landing surfaces are obligatory grinding. Quality control of welded joints is carried out. Before painting, all constructions are stripped. The shredder is covered with powder paint, which significantly extends the life of the constructions.
We are confident in our products; therefore, we provide a 36-month guarantee for the AM-60E. In addition, we, as a manufacturer, produce both guarantee and post-warranty maintenance of the wood chipper AM-60E.
By purchasing a wood chipper from us you get a reliable assistant on the way to your energy independence!

1070 mm
637 mm
935 mm
115 kg
Inlet slot size:
90x105 mm
Max. productivity:
2 m3/h
Soft wood max. diameter:
60 mm
Hard wood max. diameter:
50 mm
Length of ready pieces:
50...80 mm
Quantity of knives:
6 pcs
Max. turns on cutting knives:
360 rpm
Engine power:
4 kW
Max. turns on engine shaft:
3600 rpm
380 V
Products Show
ARPAL Factory

Customer Photo
Our Certifications


Q: What are the main consumables for branch chippers?

A: The main consumables are knives. They need to be sharpened once for 200-300 cu. meters of firewood. Also periodically it is necessary to change the wedge-shaped belts, oil and the filter of the gasoline engine.

Q: What else can the wood chipper cut?

A: Our wood chippers successfully cope with rolls of wall-paper, paper spools, contraband cigarettes, corn stalks, a vine and td.

Q: What is the minimum thickness of a branch that your chippers can cut?

A: The gap between the knives is less than one millimeter. All that is thicker will be cut.

Q: And if I am pulled into the chopper?

A: The length of the inlet hopper won't let you touch the knives, but I recommend not to test this. Moreover, on some models there is safety frame with filum switch. 

Q: What is the term of knives working ability?

A: One sharpening of knives is enough to cut 200-300 cub. meters of recycled material. After that you may sharpen the knives again.

Q: For which boilers is chipped wood suitable?

A: The products received in process of work with wood chippers can be used for pyrolysis and solid fuel boilers, fire stoves and also while production of charcoal.

Q: What would happen if I pull the branch of bigger diameter into the chipper?

In case of overloading the safety clutch or thermorelay will prevent the machine from breakage.

0.016 s.