10kw 11kw 15hp VFD 3 Phase 380V Low Cost Variable Frequency Inverter AC Motor Drive (62035399830)

Share on:


Price:RUB 15,651.13
Price in USD:Details

Quantity:


Product Overview

Description

general vfd

Product Description

10kw 11kw 15hp VFD 3 Phase 380V Low Cost Variable Frequency Inverter AC Motor Drive

Model
M0110G3
Rated Voltage
3 phase AC 380V 415V 440V 460V 480V 
Output Frequency Range
0~600Hz
Control Mode
V/F Control, Sensorless Vector Control, Torque Control
Starting Torque
0.5Hz/150%(SVC), 1Hz/150%(V/F);
Communication port
RS-485, which support MODBUS protocol
Vibration
Less than 5.9m/s
Fault Protection
protect from over current, over voltage, under voltage, over temperature, phase failure, over load etc.

5.5kw-37kw new750

 

product inside detail.jpgdiagram detail.jpg

Modbus

11.jpg

Specification
Item Specifications
Basic function Over load capability G type:150% rated current 60s;180% rated current 3s
P type:120% rated current 60s;150% rated current 3s
Torque boost Auto torque boost function; Manual torque boost 0.1%~30.0%
V/F curve Linear V/F, multi-point V/F and square V/F curve(power of 1.2,1.4,1.6,1.8,2)
V/F separation 2 ways: separation and semi-separation
Acc./dec curve Straight line or S curve acceleration and deceleration mode,
Four kinds of acceleration and deceleration time. Acceleration and deceleration time range from 0.0s to 6500.0s
DC braking DC braking frequency:0.00Hz to maximum frequency. Braking time:0.0s to 36.0s
Brake current value:0%-100%
Jog control Jog frequency range:0.00Hz~50.00Hz; 
Jog acceleration/deceleration:0.0s~6500.0s.
Simple PLC   It can realize at maximum of 16 segments speed
Basic function  Multiple segment speed running Running via the built-in PLC or control terminal.
Built-in PID It is easy to realize process-controlled closed loop control system.
Auto voltage regulation (AVR) It can keep constant output voltage automatically in the case of change of network voltage.
Over-voltage/current stall control It can limit the running voltage/current automatically and prevent frequent over-voltage/current tripping during the running process.
Quick current limit Minimize the over-current fault, protect normal operation of the AC Drive.
Torque limit & control "Excavators" characteristics, automatically limit torque during operation, prevent frequent over-current tripping. Closed loop vector mode can realize the torque control.
Personalized function Instantaneous stop non-stop When instantaneous power off, voltage reduction is compensated through load feedback energy, which could make AC Drive keep running in a short period of time.
Rapid current limit To avoid AC Drive frequent over-current fault.
Timing control Timing control function:set time range 0Min~6500.0Min.
Running Command source Operation panel reference, control terminal reference and serial communication port reference. These channels can be switched in various modes.
Frequency source There are totally eleven types of frequency sources, such as digital reference, analog voltage reference , analog current reference, pulse reference, MS speed, PLC, PID and serial port reference.
Input terminal 5 digital input terminals.
2 analog input terminals.
1 supporting 0-10V voltage input or 0~20mA current input terminal.
Output terminal 2 digital output terminals.
2 relay output terminals.
2 analog output terminals, supporting 0~10V voltage output or 0~20mA current output.
Keyboard operation Keyboard potentiometer Equipped with keyboard potentiometer or coding potentiometer.
Keyboard operation Protection function It can implement power-on motor short-circuit detection, input /output phase loss protection, over current protection, over voltage protection, under voltage protection, overheating protection and overload protection.
Environment Using place Indoor, and be free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt.
Altitude Below 1000m
Ambient temperature -10 ℃ to +40 ℃ (Derating use when under ambient temperature of 40 ℃ to 50 ℃)
Humidity Less than 95%RH,without condensing
Vibration

Less than 5.9m/s  (0.6g)

 

inverter application

 

Packaging & Shipping

packing 750

Application

inverter application 

Company Information

 M-driver workshopexhibition 2019

Reviewcertificate

FAQ

Q 1: Are you trading company or manufacturer ?

A: We are factory.

Q 2: How long is your lead time?

A: Generally it is 3-7 days if the goods are in stock. or it is 10-20 days if the goods are not in stock, it is according to quantity.

Q 3: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample,but we will charge the sample fee and the cost of freight.

Q 4: What is your terms of payment ?

A:We accept T/T, L/C and CASH.

 

Q 5: What is the standard of package? 

A. Export standard package or special package according to customer requirement.

 

Q 6. Is there any discount ?

A. The discount will depend on the quanlity you purchase.

 

Q 7. What is your supply capacity?

A. The week output of the factory exceeds 500 PCS.

 

Q 8.Do you provide warranty for the goods?

A. Yes, we provide 18 months of warranty for all the goods from us.

 

Q 9.Could M-driver provide technical support?

A.We' have more than 12 years experience in this field. If there's any problem, please feel free to contact us, we'll provide suggestion from our engineer to help you solve the problem.

 

Sophie Liu

 

Phone/wechat/whatsapp: +8615811833276

 

Skype:sophieliu5

62035399830
0.0148 s.