Share on:
For toilet seat and injection products, urea formaldehyde resin cheap price, moulding compound granule
Urea-Formaldehyde Molding Compound, also know as Urea Moulding Compound is produced by adding cellulose filler, pigments, cure regulators, lubricants into Urea Formaldehyde Resin, and drying, grilling, sieving.
No. | Index | Unit | Type | Testing Method |
A- | ||||
1 | Appearance |
| After molding, the surface should be flat, shinny and smooth, no bubbles or crack, color and foreign material achieves standard. |
|
2 | Resistance to boiling water |
| No mushy, permit little color fade and purse | GB13454 |
3 | Volatile matter | %,≤ | 4.00 | GB13455 |
4 | Water absorb (cold) | mg, ≤ | 100 | GB1034 |
5 | Shrinkage | % | 0.60-1.00 | GB13454 |
6 | Distortion Temperature | °C≥ | 115 | GB1634 |
7 | Fluidity | mm | 140-200 | GB13454 |
8 | Impact Strength (notch) | KJ/m2, ≥ | 1.8 | GB1043 |
9 | Bending Strength | Mpa, ≥ | 80 | GB9341 |
10 | Insulation Resistance after 24h in water | MΩ≥ | 104 | GB1410 |
11 | Dielectric strength | MV/m,≥ | 9.0 | GB1408 |
12 | Baking Resistance | GRADE | I | GB2407 |
Molding condition: (Reference only)
Temperature | 150-180°C |
Pressure | 25-40Mpa |
Curing time | 0.24-0.3 min/mm |
Product classification :
UF1P-xxx, Powder form (compression grade)
General purpose, mostly used for molding melamine dinnerware, electrical appliances, with lowest price, good property.
UF1G-xxx, Granular form (compression grade)
General purpose, mostly used for making low-volage electrical equipment, buttons,sanitary fitting, etc. Granule size: 1.0mm-2.0mm. Granule material will make the workshop's environment much better.
UF1I-xxx, Granular form (injection grade)
Top grade, used for injection machine, with best product appearance, highest production efficiency; used for making all kinds of electrical appliances, handles, insulated component, with high cost performance.
01. This series of products are amino-plastics based on urea formaldehyde resin and takes fibre, mineral as the filling, together with both lubricant, hardener and pigment, etc.
02. Used for molding dinnerware/tableware, electrical appliance, button, toys, mechanical component, toilet lid etc.
Plastic woven bag with inner moisture proof polyethylene bag. Kept in airy, dry and cool place.
Storage period: six months from the manufacturing date.
Transportation Caution: avoid moisture, heat, dirt and packaging damage.
20 feet full container load=20 Metric Tons
Jining Gaoxing New Material Co., Ltd. is located in Jining national high tech Industrial Development Zone in Shandong province.
Our main products contains urea-formaldehyde-triamine composite granule,melamine formaldehyde moulding compound and urea formaldehyde moulding compound, and we also produce adhesives of environmental protection.
We have established a perfect quality management system, and also get ISO9001 quality management system and ISO14001 environment system certificates.
Gaoxing company hope to cooperate with domestic and foreign customers to create a beautiful future!