Share on:
manual wood cutter finger joint shaper machine
Application:
Finger joint shaper machine is mainly used for combing of medium and short wood.It is a mechanical processing equipment to improve the utilization rate of wood and the performance of wood.It is widely used in wood processing industry, especially suitable for construction company
Features:
1. The high power main motor makes the tooth opening process easier and more efficient
2.Its unique frame design structure makes the machine run more smoothly without vibration
3.Double cylinder is adopted for side pressure to ensure the process of gear opening is safer and more reliable.
4.Steel wear - resistant linear guide rail lengthens service life by 2 times, and wood processing precision is higher.
5. Machine tool bearing is manufactured by well-known enterprises in China, which ensures the accuracy and stability of machine tool operation.
Advantage:
1. High utilization rate of wood, saving cost.
2.The machine is of high cost performance, especially suitable for small and medium-sized production enterprises.
3. This machine is the preferred equipment for the processing and reuse of building quadrangle wood. The interface strength after adhesive is greater than that of wood itself.
Technical Parameters:
Worktable size | 650x540mm | |||
Max working width | 400mm | |||
Max.working height | 140mm | |||
Shaper spindle diameter | Ø50mm | |||
Finger cutting knife diameter | Ø160mm | |||
Shaper spindle speed | 7000r/min | |||
Cut off saw speed | 2840r/min | |||
Cut off saw shaft diameter | Ø25.4mm | |||
Cut off saw diameter | Ø305mm | |||
Cut off saw power | 2.2kw | |||
Shaper spindle power | 7.5kw | |||
Working air pressure | 0.4-0.6mpa | |||
Overall size | 1500×1410×1460mm | |||
Net weight | 550kgs |