Share on:
Veterinary Infusion Pump can be with Heating Function
Parameter SY-1200L (drip clip and heating function are optional, please contact seller if you need) |
|||
Conventional model |
15 d/ml infusion set 0.0ml/h~1200ml/h 20 d/ml infusion set 0.0ml/h~1200ml/h 60 d/ml infusion set 0.0ml/h~300ml/h Note:minimum resolution of setting flow rate is 0.1mL/h when rate is above 1000mL/h, the Resolution is 1mL/h. |
||
Drip Mode |
15 d/ml infusion set 0 d/min~300 d/min 20 d/ml infusion set 0 d/min~400 d/min 60 d/ml infusion set 0 d/min~300 d/min Note:The minimum resolution dripping speed Settings 1d/min. |
||
Accuracy |
≤±2%(Note:Under the condition of the benchmark test, using high elastic silicone iv path accuracy after calibration and commissioning.) |
||
Bubble Detector |
Ultrasonic detection method:Bubble above 25ul is detected |
||
Total Infusion Volume |
0.0ml-9999ml(0.1ml/h increment,1ml/h increment if over 1000ml/h) |
||
Volume Limit |
0.0ml-9999ml(0.1ml/h increment,1ml/h increment if over 1000ml/h) |
||
Occlusion |
(H):800±200mmHg (106.7±26.7kPa) (C):500±100mmHg (66.7±13.3kPa) (L):300±100mmHg (40.7±13.3kPa) |
||
History Record |
These serial products can maximally store 4500 pieces of history records. The record includes the following information: Date, flow rate, alarm data, total volume delivered, occlusion pressure and syringe brand and serial number. |
||
Alarm |
Near empty alarm,Empty alarm,Door open alarm, Bubble alarm,limited value reached alarm,AC power failure,Low battery alarm,Battery empty alarm, Remind alarm, Flow regulator or inlet valve closed alarm (optional) |
||
Power |
Supply Voltage:AC100V~240V(±10%),Power Frequency: 50Hz-60Hz Built-in Battery:DC15V Ni-MH battery(It can be replaced by lithium ion battery pack necessary.) Working time of battery:In case the battery is fully charged, the continuous working time can be up to 6 hours at the speed of 25ml/h. Maximum power:30VA;Note:Before the first use of this product, the battery must be charged while being shut down for more than 12 hours. |
||
Working Environment |
Temperature:+5℃-+40℃ Relative humidity:20%-90% Environmental pressure:860hPa-1060hPa |
||
Transport And Storage Environment |
Temperature:-20℃~+55℃; Atmosphere Pressure:500hPa~1060hPa. products should be stored in the relative humidity in the range of 10% ~ 93%, no corrosion gas indoor and ventilated. |
||
Electric Safety Classification |
Class I, CF type,Built-in battery,Continuous operation equipment |
||
Water Proof Level |
IPX4 |
||
Net Weight |
1.8kg(include fastener) |
||
Dimension |
175mm*125mm*200mm |
||
Function |
|||
KVO(keep-vein-open) Safety lock for PURGE/BOLUS Apply to any high elastic infusion sets Preset occlusion detection pressure level Preset Volume To Be Infused Audible and visual alarm (volume adjustable) RS232 interface History data memory |
Standby function Safety lock for flow rate adjust Bubble Detector Bolus release Inquiry of total infused volume Power indicator Vehicle Power Double CPU |
||
Advanced Function |
|||
Adjust occlusion detection pressure Adjust KVO rate A single exhaust maximum limit set Calculation mode,Gradient mode |
Infusion parameters calibration Intelligent pressure test Preset maximum value of flow rate Preset system time |
Please click following picture to know more information about the heating function:
Remark:
This infusion pump is with one year warranty. If you need three years warranty, please contact seller to change the warranty terms and price. The unit price with three years warranty is 270USD.
Warranty rules :
1. One year warranty for free;
2. Offer spare parts for free, during the warranty period when you have RMA problem.