Product Name :
Gasoline Tach Hour Meter
This meter works for 4 stroke 4 cylinder and 2 stroke 2 cylinder (2P1R) engine.
If you engine is 4 stroke 2 cylinder and 2 stroke 1 cylinder (1P1R),you can leave message when buy.
Stroke and cylinder
1P1R=Factory set 2 stroke:
4 stroke 2 cylinder
2 stroke 1 cylinder
4 stroke 1 culinder(a small part,such as OHV engine)
2P1R=Factory set 4 stroke:
4 stroke 4 cylinder
2 stroke 2 cylinder
This tach hour meter record gasoline engine’s total running hours and RPM by getting the induction from spark plug cable when engine starts.
When engine starts , LCD displays current RPM; when engine stops, LCD displays total running hours.
1.Has the same features as hour meter plus tachometer feature
2.Indicates operation in RPMs and hours
3.Timing System Including: accumulating total running hours TOTAL HOURS.
4. RPM Measuring System Including: measuring current engine RPM.
5. Easy installation no power or ground required
6.No Battery Required-connects to spark plug wire
7.Unique Design Including: easy installed by wrapping around the spark plug wire of the engine, waterproof Rate IP68,etc.
8.Works on any gasoline engine
9.Maximum RPMs 30000,Maximum Hours 99999H
10.Factory set 1,2,4,cycle engine
Securing Method & Installing Method
1.Drilling into your frame with Φ2.5mm socket,then secure it to the frame coming with two pick-up screws.
2.Using padded double-sided tape on the backside of the meter and secured it to the frame spar with zip ties.
3.One side of pick-up wire insert into the groove of meter,the other side wrap around on spark plug wire.