Hot Sale V20 OBD2 GPS Tracker 2G GSM Tracking Sim Card Locator

Share on:


Price:RUB 1,610.03
Price in USD:Details

Quantity:

Add to Cart

Product Overview

Description

 
Product Description

Hot Sale V20 OBD2 GPS Tracker 2G GSM Tracking Sim Card Locator

 

 

OBD locator V20

The OBD locator is a special OBD-type GPS vehicle positioning terminal that does not need to be installed in a plug-and-play. Based on the MTK2503A solution, the product design is compact and compact. It has a standard OBD connector, and the installation process is simple and fast. The terminal has a built-in backup battery, MIC, and external power. Detection, etc. can realize OBD diagnosis, tamper alarm, remote recording monitoring, ignition detection function, users can use the mobile phone to query the real-time position and driving trajectory of the vehicle anytime and anywhere.

 OTRACKER-18.jpg

OTRACKER-14.jpg

 

Supported vehicle data

Read error diagnostic code

Clear the fault code (clear the error code and turn off MIL)

Engine revolutions per minute (RPM)

Calculated load value

Coolant temperature

Fuel system status

Speed

Short-term fuel situation

Long-term fuel situation

Intake manifold pressure

Fuel injection advance time

Intake air temperature

Air flow rate

Throttle absolute position

Oxygen detection voltage associated with short-term fuel state

Fuel system status

Fuel pressure

Fuel consumption monitoring, etc.

 

Technical Parameters:
Main control chip MM32L073
Module MTK2503
Communication method GPRS (2G)
Working voltage DC13.5V
Working current 55 mA
Standby current 12mA
Operating environment -35~80°C
Storage temperature -40 to 85 ° C
Note

This product needs to download the application of "Weika Online"

This product requires a medium SIM card (supports 2G)

 

 OTRACKER-15.jpg

 

Product indicator definition

Red light Power indicator, plugged into the car OBD interface is always on after power is turned on

Yellow light GPS positioning status indicator, does not light when GPS is off, flashes when GPS search star, always bright to indicate positioning OK

Green light GSM status indicator, flashing indicates that the signal is receiving, slow flashing indicates the signal

 

Configuration and selling points:

Do the most complete and cost-effective products

Vehicle OBD diagnosis (the industry's most comprehensive protocol automatically detects and clears vehicle fault abnormalities)

Real-time location tracking (smart upload location information)

Beidou + GPS high sensitivity GPS chipset (faster and more accurate positioning)

Vehicle ignition detection (reporting vehicle status in real time)

Electronic fence (terminal cross-border alarm)

Arming/disarming (automatic or manual arming/disarming)

Pull out the alarm (the terminal pulls out the automatic alarm)

Vibration alarm (automatic alarm for abnormal vibration of the vehicle)

Built-in polymer battery (terminal power failure alarm)

Multiple ways to query location (APP client, PC platform)

Built-in microphone for remote recording and monitoring in the car

 

Client

Mainly for the vehicle OBD diagnosis and covert tracking and monitoring have special needs in the customer base.

 

product advantages

Integrated to achieve vehicle positioning, in-vehicle recording monitoring, OBD and other functions;

GSM 2G multi-band, supporting OBD diagnostic functions not found in other similar products;

OTRACKER-20.jpg

OTRACKER-16.jpg

 

3.01 GSM Specificatio:
Communication standardns GSM
GSM band 850/900/1800/1900MHz
GPRS Class 12, TCP / IP
body memory 32 + 128Mb
phase error rms phase error <5, peak phase error <20
Maximum output power GSM850/GSM900: 33±3dBm; GSM1800/GSM1900: 30±3dBm
the maximum frequency error ± 0.1ppm
receiving sensitivity Class IIRBER2% (-102dBm)

 

 

3.02 GPS Specifications:
GPS chip MTK high sensitivity GPS chipset
Frequency L1, 1575.42MHz C/A code
the number of channels 66 channels
positioning accuracy <10 meters
tracking sensitivity -165dBm
capture sensitivity -148dBm
Positioning time average hot start: ≤ 15sec (open sky) average cold start: ≤ 50sec (open sky)

 

 

3.03 OBD Specifications:
Compatible with more than 90% of models on the market at home and abroa
the industry's most comprehensive 9 kinds of agreements are fully supported
Supports OBD2 Protocols

SAE J1850 PWM (41.6 Kbaud)

SAE J1850 VPW (10.4 Kbaud)

ISO 9141-2 (5 baud init, 10.4 Kbaud)

ISO 14230-4 KWP (5 baud init, 10.4 Kbaud)

ISO 14230-4 KWP (fast init, 10.4 Kbaud)

ISO 15765-4 CAN (11bit ID, 500 Kbaud)

ISO 15765-4 CAN (29bit ID, 500 Kbaud)

ISO 15765-4 CAN (11bit ID, 2500 Kbaud)

ISO 15765-4 CAN (29bit ID, 250 Kbaud)

 

 

 

3.04 Electrostatic protection contact +/-6KV, air +/-8KV

3.05 Microphone performance

mic-36db (-36±3db)

 

 

3.06 Main specifications:
Monitoring range ≤ 1M Microphone performance reaches -36db (-36±3db)
antenna built-in GPS antenna, GSM quad-band antenna
LED indicator GPS (yellow), GSM (green), Power (red)
connector OBD standard interface
working voltage / current 9-30VDC / <50mA (12VDC)
built-in battery 3.7V industrial grade lithium polymer battery
Standby time After the external power is disconnected, the battery can continue to track for 30 minutes.
Standby current

After the vehicle is turned off, the standby current of the product is within 3.5MA. After the flameout, the equipment is offline and the battery is protected.

9, body color: white (packaged) + black ABS

temperature range working temperature (-20 ° C ~ +70 ° C); working humidity: 5% ~ 95% non-condensing; storage temperature: -20 ° C ~ 70 ° C.

 OTRACKER-17.jpg

OTRACKER-19.jpg

 

 

 

Packaging & Shipping

 

Packing including:

1pc x OBD2 unit

1pc x user manual

1pc x Box package

 

Packing:

Paper box package + Standard Carton case package outside or As per your customized packag

 

Delivery Time:

3-7 working days for samples; 7-30 working days for bulk goods.

Alibaba Trade Assurance can assure all your benefits during the whole deal, contact sales to know more!

OTRACKER-09.jpg

Related Products

1.1.png

Company Information
 
Certification
 
Our Team
 
Shipping&Payment
 
FAQ

Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.

 

Q2. What about the lead time?
A: Sample needs 3-5 days.

 

Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available

 

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

 

Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.

 

Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

 

Q7: Do you offer guarantee for the products?

A: Yes, we offer 1 year warranty to our products.

 

Q8: How to deal with the faulty?
A: Our products are produced with strict quality control system (if the problem occurs, the product can be replaced free of charge)

We Recommend

0.0031 s.