Share on:
The Manual Acrylic Bending Machine is the core part of letter bending machine. You can assemble various kinds of ideal practical acrylic bender with this heater.
This machine can be widely used in decoration engineering, sign making, display cabinet, aquarium wrapping, lighting LED channel letter, bending the supermarket shelves, curtain wall,anywhere needs plastic bending.
It can bend all kinds of plastic sheet.Including Acrylic,PVC,plexiglass plastic etc,if only the thickness of the sheet is no more than 6mm. Even if the thickness of acrylic sheet is beyond 6mm, you can use two heaters to heat the top and bottom of the sheet at the same time, or you need to cut a slot on the sheet.
Step1: Fix the pipes on the heater.
Step2: Get ready for the water pump with pipes attached.Complete the heater.
Step3: Put the pump into a water container with 30L water. Turn on the pump and let water run in pipes.
Step4: Connect the power supply and heater.
Step5: Plug the power supply and heater's plug into a socket, adjust the temperature by thermostatic. Revolving the switch clockwised to heat up, and anti-clockwised to heat-down.
Step6: After about 5~6 minutes heating time, the heater is ready to bend the sheets.
Packing: Well packed with wrapping bubble, then in hard paper carton.
- Arc & angle shape
- Lightweight & portable
- 360degree rotating
- With Length and angle positioning ruler,
- Heating temperature can be adjusted freely,
- Safe and durable!