Aluminum cnc linear bearing 16mm SBR16 SBR 16
US $1.83-$1.89
Cheap HIWIN HGH HGW QHH 15 20 25 30 35 45 55 65 CA CB HA HB SA Heavy Load heavy duty Cnc Linear Slide Block linear guide rail
- Category: Machinery Accessories >>>
- Supplier: Dongguan,KSV,Transmission,Technology,Co.,Ltd.
Share on:
Product Overview
Description
| Product Name | HGH HGW EGH 15 20 25 30 35 45 55 65 CA CB HA HB SA Heavy Load Cnc Linear Hiwin Slide Block |
| Material | Bearing Steel |
| Advantage | High Precision, Large Load Capacity, Low Noise, High Rigidity |
| Delivery Details | 5-15 Days After Order |
| Applications |
|
Product Description
A linear guideway allows a type of linear motion that utilizes rolling elements such as balls or rollers. By using recirculating rolling elements between the rail and the block, a linear guideway can achieve high precision linear motion, Compared to a traditional slide, the coefficient of friction for a linear guideway is only 1/50 , Because of the restraint effent between the rails and the blocks, linear guideways can take up loads in both the up/down and the left/right directions, With these features, linear guideways can greatly enhance moving accuracy,especially, when allompanied with precise ball screws.
Product Details
Linear Guide
Related Products 2
About Us
Linear Guide
FAQ
Linear Guide
1.Q: What is the HIWIN HG/EG/RG series linear guide material? What is the material of the steel ball?
A: Rail material: S55C (55 steel)
Slider material: SNCM220
Steel ball material: GCr15 (bearing steel)
2.Q: What is the minimum temperature of the HIWIN linear guide?
A: Self-lubricating/silent linear slides are -10 degrees, metal end-capped linear slides are -40 degrees
3.Q: What effect does chrome-plated nickel-plated galvanizing have on HIWIN rails?
A: Surface plating treatment can improve the rust resistance, wear resistance and surface hardness of the guide rail.
4.Q: How long does the HIWIN slider and nut lubricate once?
A: Linear guide grease; lubrication frequency is 100km per run, or 1 time every 3 to 6 months; lubricating oil; oil supply rate is not the same due to different slider specifications, it is recommended to supply oil frequency 0.3cm3/h
Ball screw grease; lubrication frequency is 100km per run, or 1 time every 2 to 3 months; 1/2 capacity of weight nut; lubricating oil; oil supply per 15 minutes = screw outer diameter due to screw specification difference (mm)/56-60---unit (CC)
5.Q: Can HIWIN silent and standard dustproof accessories be used?
A: QH25, 30, 35 and HG series are not the same as the oil scraper and fuel tank.
Contact Us
