Share on:
LCR-7010 Low cost RLC Meter 10kHz Digital LCR Meter
rlc meter
Introduction
The LCR7000 series are high precision LCR meter with basic accuracy 0.1% and 0.05% (LCR7000A) and maximum measurement frequency up to 500kHz. The 5-digit 4.3-inch TFT LCD display gives easy reading. The RS-232 interface facilitates in remote control and analysis of measurement results. With its fast measurement speed, wide frequency range and low cost, the LCR7000 series are widely used in R&D, IQC, online quality control and automatic test system.
Feature
32-bit core processor
5-digit 4.3-inch LCD display
2 signal source output impedance: 30Ω, 100Ω
100 sets memories for internal storage/save
500 memories for U disk storage/save, supports FAT16 and FAT32 files
Save the last parameter settings before power off
Standard interface: RS-232, HANDLER, USB HOST
Specifications
Model |
LCR-7010 |
LCR-7030 |
LCR-7200 |
||
Measurement function |
|||||
Test parameter |
| Z|, |Y|, C, L, X, B, R, G, D, Q, θ |
||||
Test signal frequency |
LCR-7010: 100Hz,120Hz,1kHz,10kHz LCR-7030: 100Hz,120Hz,1kHz,10kHz, 20kHz, 30kHz LCR-7200: 40Hz, 50Hz, 60Hz, 75Hz, 100Hz, 120Hz, 150Hz, 200Hz, 250Hz, 300Hz, 400Hz, 500Hz, 600Hz, 750Hz, 800Hz, 1kHz, 1.5kHz, 2kHz, 2.5kHz, 3kHz, 4kHz, 5kHz, 6kHz, 7.5kHz, 10kHz, 12kHz, 15kHz, 15.7kHz, 16.2kHz, 20kHz, 25kHz, 30kHz, 40kHz, 50kHz, 60kHz, 66.6kHz, 75kHz, 100kHz, 120kHz, 150kHz, 200kHz (38 points) |
||||
Basic accuracy |
0.15% |
0.1% |
0.1% |
||
Equivalent circuit |
Series, Parallel |
||||
Mathematical function |
Absolute Deviation and Percentage Deviation |
||||
Range mode |
Auto, Hold, Manual Selection |
||||
Trigger mode |
Internal, Manual, External, BUS |
||||
Measurement speed |
Fast: max.30, Medium: 10, Slow: 3 (times/second) (≥1kHz) |
||||
Average times |
1-255 |
||||
Delay time |
0-60s, step 1ms |
||||
Calibration function |
Open circuit, Short circuit, Load |
||||
Measurement terminal |
5-terminal |
||||
Display mode |
Direct, Δ, Δ%, V/I (monitoring test voltage and current) |
||||
Display |
5 digit 4.3-in LCD display |
||||
Measurement signal |
|||||
Output impedance |
30Ω, 100Ω |
||||
Test level |
0.1V, 0.3V, 1V |
0.1V, 0.3V, 1V |
0.05V to 1V |
||
Test level accuracy |
5% |
||||
Measurement display range |
|||||
|Z|, R, X |
0.01m Ω - 99.999 MΩ |
||||
|Y|, G, B |
0.0001µS - 99.999 S |
||||
C |
0.0001 pF - 9.9999 F |
||||
L |
0.0001 µH - 999.99 H |
||||
D |
0.0001 - 9.9999 |
||||
Q |
0.0001 – 9999.9 |
||||
θ (DEG) |
-179.99º -179.99 º |
||||
θ (RAD) |
-3.14159 - 3.14159 |
||||
Δ% |
-999.99% - 999.99% |
||||
Comparator and interface |
|||||
Comparator |
N/A |
4-bin comparator |
5-bin comparator |
||
Memory |
100 sets memories for internal parameter settings storage/save 500 sets for U disk parameter settings storage/save |
||||
Standard interface |
Standard: RS232, USB HOST |
Standard: RS232, USB HOST, HANDLER |
|||
Optional interface |
N/A |
||||
General |
|||||
Operating environment |
0°C - 40°C, ≤80%RH |
||||
Power source |
110/220V±10%, 47~63Hz |
||||
Power consumption |
≤30VA |
||||
Accessories |
4-terminal Kelvin test clip leads, RS232 cable, power cord, operation manual |
||||
Dimensions |
265W*100H*340D mm |
||||
Weight |
Approx.3.5kg |
All products by TWINTEX are tested and guaranteed to keep in good quality with one year warranty except wearing parts, such as test leads and power cords.
If quality problems happen during warranty period, we provide technical supports and spare parts. Our local distributor if any will help to solve your problems in time after receiving phone calls or emails.
Welcome to contact us at any time if any questions about using our products.
However, TWINTEX is free of responsibility to personal injuries or property damages caused by improper operation.