Share on:
Motor type | YHM-160 | |
FANU system | Axis of rotation | 350W |
Swing arm shaft | 500W | |
MITSUBISHI system | Axis of rotation | 400W |
Swing arm shaft | 750W | |
YASKAWA System | Axis of rotation | 400W |
Swing arm shaft | 750W |
Specifications/Model | Unit | YHM-160 | ||||
Diameter of turntable disk surface | In the meantime, it is necessary to160 | |||||
Table height | Level | Mm | 180/215 | |||
Center Height | 90° | Mm | 95/125 | |||
Total height | Level | Mm | 180/215 | |||
Diameter of central hole | Mm | 12H7 | ||||
WorkbenchT Groove width | Mm | 12H7 | ||||
Tilt angle | Deg | ±95°/±120° | ||||
Turntable end surface runout | Mm | 0.01 | ||||
Parallelism between the disk surface and the base surface of the rotating table | Mm | 0.01 | ||||
The center hole diameter of worktable jumps | Mm | 0.01 | ||||
Axial | - | Rotating axis (B Axis) | Tilt axis (A Axis) | |||
Minimum Setting Unit | Deg | 0.001 | 0.001 | |||
Indexing accuracy | Sec | 16 " | 23 " | |||
Repeated positioning accuracy | Sec | 3 " | 3 " | |||
Output load torque | Optional motor (General) | - | 400w | 750w/1kw | ||
Continuous/Maximum torque | N | 61/87 | 153/882 | |||
Total reduction ratio | - | 1:51 | 1:121 | |||
Maximum speed of rotary table | Motor speed 3000 turn | r.p.n | 48 | 50/25 | ||
Maximum workload | 0° Horizontal time | kg | 46 | |||
0°~90° Tilting time | kg | 35 | ||||
Turntable weigh | kg | 35 |