Share on:
Module Series 18000-6C High Quality 840-960Mhz Oem 33Dbm Adjustable Uhf Rfid Reader R2000
Quick Details
Module Type | MCR–600 | MCR-800 | MCR-900 |
Real Photo | |||
RF Channel | Single Channel | Four channel | Eight channel |
RF Connector | MMCX | SMA | SMA |
Antenna Connection Mode | Single Antenna | Four Antenna | Eight Antenna |
Interface Connector | Molex 53261-1571 | ||
RF Connectors Material | Gold-plated brass | ||
PCB Material | Rogers FR4 gold-plated | ||
Shield Material | Aluminum |
Description
| Feature | Description |
1 | Based on Indy R2000 chip | RF transceiver is Impinj Indy R2000. |
2 | High performance anti-collision algorithm | Unique I - Serch multi-tags identification algorithm. Provide the highest efficiency. |
3 | Optimized algorithm for a little of tags | Better tag response time. Optimized for small tag quantity applications. |
4 | Dual CPU architecture | Main CPU is responsible for tag inventory, assistant CPU is responsible for data management. Inventory and data transfer are parallel and simultaneous. This feature improves the total performance significantly. Assistant CPU is responsible for generating real random number. Assistant CPU is responsible for system operating surveillance. |
5 | Fast 4/8 antenna switch inventory | High speed inventory therefore antennas could be switched rapidly. The minimum inventory duration for an antenna is 25ms. Every antenna’s inventory duration is configurable. |
6 | Two inventory modes | Buffer mode and real time mode. In buffer mode, inventoried tag will be stored in buffer. This mode improves the efficiency of multi tag inventory. |
7 | Hardware system halt detection | Hardware CPU status surveillance. Run for 24 hours×365 days without system halt. |
8 | Low operation voltage | The lowest operating supply voltage is 3.7V. Can be powered by lithium battery. |
9 | Low power consumption | Low-power Mode, few tags only 600mA +/-10%(5V DC Input). Maximum out power only 1.2A +/-10%(5V DC Input). |
10 | PA health surveillance | PA status surveillance. Make sure PA never works under saturated state. Protected it for long term operation. |
11 | 18000-6B/C full compatible | 100% 18000-6B/C compatible. Can be switched rapidly between protocols. |
12 | 18000-6B large data read/write | Read 216 bytes in one time takes less than 500ms. Write 216 bytes in one time takes less than 3.5s. Can also read/write data with various lengths. Extremely stable (approximate 100% success rate). |
13 | Antenna connection detection | Protecting RF receiver. Can be cancelled by command. |
14 | Bistatic antenna configuration | Bistatic antenna configuration improves receive sensitivity by 13dB. |
15 | High power LED driver | Can output 50mA output current to drive a high power LED. |
16 | Excellent onboard power system | 8 independent power supplied on board. Every unit is supplied independently. Each power supply has soft start function. Improves the stability of the power supply system. |
17 | Multi-board temperature sensor | Multi point surveillance, Accurate monitoring system operating temperature. |
18 | Dual backup power output correction | Make sure output power can be fine adjusted. Two mutually backup power parity modules. Unless also damaged, the system can operate normally. |
19 | Concise and effective command system | Serial communication interface. Simple, convenient and effective for easy integration. |
20 | Excellent thermal design | All heating devices have thermal structure. A large area of heat sink contact surface. Thermal coupling interface using high thermal conductivity solid materials which are non-volatile under high temperature. |
A: We are factory, we own industrial area of around 3,000 square meters along with three production lines and more than 100 employees. The monthly output is 40 million pieces for PVC plastic cards, 5.5 million pieces for smart cards and 5 million pieces for RFID tags .
Q: What is the minimum order?
A: We can print as few as 500 full colour plastic cards (offset printing). But normally for international business, we perfect to start from 2000pcs.
A: Generally it is 2-3 days if the goods are in stock. or it is 7-10 days if the goods are not in stock, it is according to quantity.
A: 1.Yes, we could offer the sample for free in stock, but need charge the freight.
2. If you need us to design sample for you, we will charge the design cost.