Eco-friendly eel dryer carp drying machine fish dehydrator

Share on:

Price:$17,759.00 - $19,732.00
Price in USD:Details


Product Overview


Eco-friendly eel dryer carp drying machine fish dehydrator


Product Description

Product Description:

What Are DRYTECH Heat Pump Drying Machine?

DRYTECH Heat Pump Drying Machine takes advantage of the reversed Carnot principle, absorbing the heat from around and sending the heat to the materials which will be dried. This kind of dryer is mainly composed of heat pump dryer and drying chamber. This dryer will be controlled by touch screen controller, and the temperature can be adjusted. It has low electric consumption.

Working Principle:


Eco-friendly eel dryer carp drying machine fish dehydrator

No MOQ and Customized limitd
PLC+Touch Screem Control
7-10 Day delivery time


Single dryer+drying chamber
Power inputKW5.59.519.4
power supplyV/PH/HZ380V/3PH,50/60HZ380V/3PH,50/60HZ
Rated currentA9.6A(380V),22A(220V)17.030.0
Heating capacityKW10.521.042.0
Cooling capacityKW7.818.032.0
Max temperature≤75≤75≤75
Working condition0-430-430-43
Electric shock protection grade111
Max exhause pressureM(P)a303030
Noise d(B(A757575
Power consumption/HKWH4.88.515.0
Electric heaterKW3.06.012.0
Demsnssion of dryerMM3160*2070*22005700*2170*22005810*3230*2200

Buying guiding:

Recommend drying machine+Drying chamber sizes

1One unit DT300H+Drying chamer300/batch4000*2000*2200
2One unit DT600H+Drying chamer600/batch6000*2800*2200
3One unit DT1200H+Drying chamer1300/batch6000*3000*2200
4One unit DT300HD+Drying chamer1200/batch7000*2200*2200
5One unit DT600HD+Drying chamer1500/batch10000*2800*2200
6One unit DT1200HD+Drying chamer3500/batch10000*3000*2200

 Similar Products:


You may like


Our Projects

Our projects:





Company Information
Our Factory:
Factory introduction.jpg

Production room.jpg




Production Processing:

.jpgMain components:

Main components1.jpg

Packaging & Shipping

Packing and shipping:





Usually There is three working mode only


Drying + dehumidify


Drying: temperature can rise fast, but dryer cannot discharge moisture air

Drying + dehumidify: chamber temperature rise and discharge moisture air

Cooling: temperature can down to 10c(minimum)

Sometimes, if the dryer cannot control the temperature accurately, please choose Temper + humidity


Drying machine FAQ

1.high pressure protection air circulating fans does not working

a1. AC contactor use for hot air circulating fans overloading protection(please check power source whether lack phase/connecting port or voltage not stable)

a2. part of hot air circulating fan not working(check whether the fans have many ON/OFF switch or some fans was burned)

a3. Fan was damaged (replace new fan or uninstall damaged fans)

B.Too much more products on trays or too much more trays on trolleys lead to block hot air (hot air cannot circulating in drying chamber or too slow wind speed, usually two tray’s distance at 8-10cm is reasonable).

C.electronic expansion valve throttle opening too small; or jammed.

c1. Controller adjust electronic expansion valve’s opening to small automatically(temperature sensor not accurate—change installation place, exchange 1# and 2# sensor’s position)

c2. electronic expansion valve does not working(turn valve body)

D.chamber’s temperature too high(set lower temperature)

E.refrigerant is not high temperature type, re-fill gas.

2. low pressure protection

A. leak gas(check leak point, repair)

B. weather too cold(expand check time for low pressure protection, or charge low temperature gas, e.g. R22/R417A)

C. electronic expansion valve opening too small(adjust bigger)

3. exhaust temperature too high protection

A. leak gas(check leak point, repair),

B. electronic expansion valve does not working(turn valve body).

4. temperature sensor error(replace new one)

5. discharge moisture too slow or does not discharge moisture A. dehumidify fan was damaged, B. controller go wrong, C. dehumidify fan power

Our Services

Our service:

A. Payment Service

1, T/T

2, L/C (for container order only)
3, Western Union, (for sample order & parts)

B. Technical service

1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service 
1, Technical support for your installation, operation and maintenance. 
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty



0.0097 s.